SOLVED!!! HALO Brightness %100 with lowbeams F30LCI NON ADAPTIVE LED HEADLIGHT

okan992 · 02-28-2016, 08:36 AM

THANKS TO dmnc02

I tried everything since my car delivered. And dmnc02 solved it.

With non adaptive led headlights (adaptive ones could do the same im not sure)

BOTH FLE MODULES

POLI1_Idx
POLI2_Idx
POLI3_Idx

Change the 05 to 04 in werte values
ex: the default is like this
00, 00, 00, 00, 00, 00, 05, 00, 00, 00
after it should be like this
00, 00, 00, 00, 00, 00, 04, 00, 00, 00

and please share the photos with %100 halos with lowbeams

dmnc02 · 02-28-2016, 10:16 AM

Just to be clear, the above coding is for EU-spec F30/31 LCI with the non-adaptive LED headlights.

howiegu · 02-28-2016, 04:41 PM

What about 60% brightness?

dmnc02 · 02-28-2016, 07:19 PM

Quote:

Originally Posted by howiegu

What about 60% brightness?

US- or EU-spec car? Adaptive or non-adaptive LEDs?

With the FLE ECUs, changing the brightness of a LED module (e.g., DRL) is no longer a matter of changing the Werte value of a predefined parameter to desired intensity (as it should be clear from the OP), so you have to take into account how the rest of the ECU is coded.

rustyminded · 03-01-2016, 01:19 PM

It's already 01, 01, 01, 01, 01, 01, 04, 01, 01, 01

what should I do !!

dmnc02 · 03-01-2016, 02:15 PM

Quote:

Originally Posted by rustyminded

It's already 01, 01, 01, 01, 01, 01, 04, 01, 01, 01

what should I do !!

Read the post just above yours

It is really impossible to tell what setting will give you 100% intensity for the position lights without looking at the way the entire ECU is coded (which varies depending on factors such as your location and whether you have adaptive or non-adaptive LEDs). If you want to know the right setting for your car, post the NCD file for your FLE ECU.

rustyminded · 03-01-2016, 03:42 PM

Quote:

Originally Posted by dmnc02

Read the post just above yours

It is really impossible to tell what setting will give you 100% intensity for the position lights without looking at the way the entire ECU is coded (which varies depending on factors such as your location and whether you have adaptive or non-adaptive LEDs). If you want to know the right setting for your car, post the NCD file for your FLE ECU.

sorry i am a little bit NOB about coding, the car is reading 01, 01, 01, 01, 01, 01, 04, 01, 01, 01
It's F20 120i not F30 so maybe that's why it's different I have coded to 05 and they were completely off lol
how can i get this NCD ?

dmnc02 · 03-01-2016, 03:54 PM

Quote:

Originally Posted by rustyminded

sorry i am a little bit NOB about coding, the car is reading 01, 01, 01, 01, 01, 01, 04, 01, 01, 01
It's F20 120i not F30 so maybe that's why it's different I have coded to 05 and they were completely off lol
how can i get this NCD ?

Yes, the fact that it is a F20 rather than F30 definitely makes a difference.

Assuming that you have not coded any other car after the 120i, the relevant NCD is the file named CAFD_000024C3_xxx_xxx_xxx.ncd in your C:\Data\CAF directory.

rustyminded · 03-02-2016, 04:34 AM

Quote:

Originally Posted by dmnc02

Yes, the fact that it is a F20 rather than F30 definitely makes a difference.

Assuming that you have not coded any other car after the 120i, the relevant NCD is the file named CAFD_000024C3_xxx_xxx_xxx.ncd in your C:\Data\CAF directory.

is it that specific file because i code a lot of cars

rustyminded · 03-02-2016, 04:44 AM

Quote:

Originally Posted by dmnc02

Yes, the fact that it is a F20 rather than F30 definitely makes a difference.

Assuming that you have not coded any other car after the 120i, the relevant NCD is the file named CAFD_000024C3_xxx_xxx_xxx.ncd in your C:\Data\CAF directory.

is it that specific file because i code a lot of cars

dmnc02 · 03-02-2016, 09:36 AM

Quote:

Originally Posted by rustyminded

is it that specific file because i code a lot of cars

The file has to be from the specific car you want to code, otherwise the settings will be different, defeating the purpose.

howiegu · 03-03-2016, 12:03 PM

Here is mine ncd settings. What need to change to set at 60% or 100%?

TIA

dmnc02 · 03-03-2016, 02:40 PM

Quote:

Originally Posted by howiegu

Here is mine ncd settings. What need to change to set at 60% or 100%?

TIA

I am assuming that this is a US-spec F30 with the non-adaptive LEDs.

If so, the easiest way to change the halo rings to 100% when used as position lights is to set POLI1_Idx, POLI2_Idx and POLI3_Idx in both FLEs to

00, 00, 00, 05, 00, 00, 04, 00, 00, 00.

To change them to 60% instead, set POLI1_Idx, POLI2_Idx and POLI3_Idx in both FLEs to

00, 00, 00, 05, 00, 00, 0F, 00, 00, 00

and then code

LmmIdx15_Intensity = 3C
LmmIdx15_Priority = 03

(edit the Werte values directly) in both FLEs.

howiegu · 03-03-2016, 05:12 PM

Quote:

Originally Posted by dmnc02

Quote:

Originally Posted by howiegu

Here is mine ncd settings. What need to change to set at 60% or 100%?

TIA

I am assuming that this is a US-spec F30 with the non-adaptive LEDs.

If so, the easiest way to change the halo rings to 100% when used as position lights is to set POLI1_Idx, POLI2_Idx and POLI3_Idx in both FLEs to

00, 00, 00, 05, 00, 00, 04, 00, 00, 00.

To change them to 60% instead, set POLI1_Idx, POLI2_Idx and POLI3_Idx in both FLEs to

00, 00, 00, 05, 00, 00, 0F, 00, 00, 00

and then code

LmmIdx15_Intensity = 3C
LmmIdx15_Priority = 03

(edit the Werte values directly) in both FLEs.

Lovely, I'll give it a go. Cheers.

White340 · 03-24-2016, 06:51 PM

Hi,

What does this do? Does this increase the brightness of the LED rings in the headlights?

White340 · 03-24-2016, 06:52 PM

By default - aren't they set to 100% during the day, and when headlights are on can be changed to 100% by modifying:

MAPPING_STANDL_V_L_PWM_LEVEL_1
MAPPING_STANDL_V_R_PWM_LEVEL_1

I am new to coding so just trying to understand.

mtx450 · 03-25-2016, 09:02 AM

Does anyone know if the main LED headlights are set to 100% by default on a US spec car?

This info is great so far!

phattbam · 03-28-2016, 11:02 PM

curious to know this as well.

okan992 · 03-29-2016, 03:45 PM

Quote:

Originally Posted by mtx450

Does anyone know if the main LED headlights are set to 100% by default on a US spec car?

This info is great so far!

This was discussed at another thread, and YES their setting are same with EU-Spec cars.

howiegu · 04-01-2016, 04:16 PM

Quote:

Originally Posted by dmnc02

Quote:

Originally Posted by howiegu

Here is mine ncd settings. What need to change to set at 60% or 100%?

TIA

I am assuming that this is a US-spec F30 with the non-adaptive LEDs.

If so, the easiest way to change the halo rings to 100% when used as position lights is to set POLI1_Idx, POLI2_Idx and POLI3_Idx in both FLEs to

00, 00, 00, 05, 00, 00, 04, 00, 00, 00.

To change them to 60% instead, set POLI1_Idx, POLI2_Idx and POLI3_Idx in both FLEs to

00, 00, 00, 05, 00, 00, 0F, 00, 00, 00

and then code

LmmIdx15_Intensity = 3C
LmmIdx15_Priority = 03

(edit the Werte values directly) in both FLEs.

Finally get to code the ring. Happy to report, all worked as stated.
Tried couple of intensities, and settled on LmmIdx15_Intensity = 32 ( 50% when headlights are on).
Very happy and thanks for the help.

smithf80 · 04-02-2016, 11:35 AM

You shouldn't do this, it makes the rings look washed out at night, there is a reason they dim when your low beams are on.

phattbam · 04-03-2016, 10:31 AM

taking a side step but does anyone know if you can turn up the eyebrows to 100% to match that of the rings while used for DRLs?

02-28-2016, 08:36 AM	#1
okan992 New Member 24 Rep 14 Posts Drives: f30 lci 320i Join Date: Sep 2015 Location: Ankara iTrader: (0)	SOLVED!!! HALO Brightness %100 with lowbeams F30LCI NON ADAPTIVE LED HEADLIGHT THANKS TO dmnc02 I tried everything since my car delivered. And dmnc02 solved it. With non adaptive led headlights (adaptive ones could do the same im not sure) BOTH FLE MODULES POLI1_Idx POLI2_Idx POLI3_Idx Change the 05 to 04 in werte values ex: the default is like this 00, 00, 00, 00, 00, 00, 05, 00, 00, 00 after it should be like this 00, 00, 00, 00, 00, 00, 04, 00, 00, 00 and please share the photos with %100 halos with lowbeams
	Appreciate 2 ErkanTR16598.00 Halsifer250.50 Tweet Quote

02-28-2016, 10:16 AM	#2
dmnc02 Major 920 Rep 1,481 Posts Drives: 2015 M4 Join Date: Feb 2015 Location: PA iTrader: (0)	Just to be clear, the above coding is for EU-spec F30/31 LCI with the non-adaptive LED headlights. __________________ 2015 Mineral Grey ///M4 6MT
	Appreciate 0 Quote

02-28-2016, 04:41 PM	#3
howiegu Member 55 Rep 249 Posts Drives: 22%E2%80%99 M440 Join Date: Oct 2012 Location: New England iTrader: (0)	What about 60% brightness?
	Appreciate 0 Quote

03-01-2016, 01:19 PM	#5
rustyminded Major 248 Rep 1,436 Posts Drives: BMW 328i Join Date: Nov 2012 Location: C iTrader: (0)	It's already 01, 01, 01, 01, 01, 01, 04, 01, 01, 01 what should I do !! __________________ F30 328i - 8 auto.. JB4-EWG harness, OCC, Injen Intake, AFE Scoop, AFE dp, AA axle-back - H&R springs, H&R Rear SB, Front Strut, F&R BMS spacers..
	Appreciate 0 Quote

03-03-2016, 12:03 PM	#12
howiegu Member 55 Rep 249 Posts Drives: 22%E2%80%99 M440 Join Date: Oct 2012 Location: New England iTrader: (0)	Here is mine ncd settings. What need to change to set at 60% or 100%? TIA Attached Images
	Appreciate 0 Quote

03-24-2016, 06:51 PM	#15
White340 Lieutenant Colonel 1392 Rep 1,986 Posts Drives: 2018 M3 Comp / 2022 X5 45e Join Date: Dec 2015 Location: NYC iTrader: (3)	Hi, What does this do? Does this increase the brightness of the LED rings in the headlights?
	Appreciate 0 Quote

03-24-2016, 06:52 PM	#16
White340 Lieutenant Colonel 1392 Rep 1,986 Posts Drives: 2018 M3 Comp / 2022 X5 45e Join Date: Dec 2015 Location: NYC iTrader: (3)	By default - aren't they set to 100% during the day, and when headlights are on can be changed to 100% by modifying: MAPPING_STANDL_V_L_PWM_LEVEL_1 MAPPING_STANDL_V_R_PWM_LEVEL_1 I am new to coding so just trying to understand.
	Appreciate 0 Quote

03-25-2016, 09:02 AM	#17
mtx450 Lieutenant 169 Rep 548 Posts Drives: 2011 E90 M3 ZCP Join Date: Jan 2016 Location: Long Island, NY iTrader: (0) Garage List 2011 BMW M3 [0.00]	Does anyone know if the main LED headlights are set to 100% by default on a US spec car? This info is great so far!
	Appreciate 0 Quote

03-28-2016, 11:02 PM	#18
phattbam Major General 180 Rep 5,822 Posts Drives: '17 Protonic Blue i3 REx Join Date: Sep 2007 Location: sf area iTrader: (21)	curious to know this as well.
	Appreciate 0 Quote

04-02-2016, 11:35 AM	#21
smithf80 Major General 2808 Rep 5,316 Posts Drives: G80 M3 6MT Join Date: Mar 2014 Location: Long Island, NY iTrader: (1) Garage List 2022 G20 330i [9.00] 2018 F80 M3 [9.75]	You shouldn't do this, it makes the rings look washed out at night, there is a reason they dim when your low beams are on. __________________ Scott, Partner Insight Automotive Consulting Click HERE for all discounted BMW New Car Pricing Click HERE for all BMW In Stock Inventory Specials Call/Text: 516-416-5481 Email: scott@insightautoconsulting.com
	Appreciate 0 Quote

04-03-2016, 10:31 AM	#22
phattbam Major General 180 Rep 5,822 Posts Drives: '17 Protonic Blue i3 REx Join Date: Sep 2007 Location: sf area iTrader: (21)	taking a side step but does anyone know if you can turn up the eyebrows to 100% to match that of the rings while used for DRLs?
	Appreciate 0 Quote