[dozug]

Initially, my car had zero error.

I've put M4 seat in my F30, then it was doing ok, no error codes. However, recently, after heavy rain, there has been driver restraint error came up on my dash, also calibration needed error came up.

So I decided to just move back with my original seat, and after i changing them out, passenger restraint error came up along with driver restraint error.

I scanned it, then there were bunch of errors, like FEM, ACSM, I think these were minor.

First two was error before i attempted with E-sys, third picture is after..

I was trying to code out passenger seat senor to disable to make the passenger restraint error out. Passenger restarint is gone now, but i have bunch of other errors..

I followed this thread:
https://f80.bimmerpost.com/forums/sh....php?t=1817495

Basically disabled:
Occupancy sensor:
CIS_Beifaher: aktiv -> nicht_aktiv

Driver seat airbag:
Sitzairbag_Thorax_Fahrer: aktiv -> nicht_aktiv

Driver seat position sensor memory:
Sitzpositionsensorserkennung_Sitzmemory_Fahrer: aktiv -> nicht_aktiv

Sitzpositionsensor_Fahrer: aktiv -> nicht_aktiv


After i get more errors, I attempted to load the original and coded it, but errors persist...

Please help me..!