08-01-2019, 06:29 AM | #1 |
Private First Class
37
Rep 199
Posts |
Rear Caliper Marking
My rear calipers have turned rusty, so I'm think about buying 2 replacements off ebay, reconditioning them and then swapping over.
Some calipers have Bosch written on them, some CBINT just above the disc rotor size. Are they exactly the same, can they both be used across the same axle, are the pads the same? |
08-01-2019, 07:06 AM | #2 |
Brigadier General
2472
Rep 4,653
Posts |
Paint them with some hammerite?
__________________
Steve Roberts UK
F82 M4 I'm running the 2024 London Marathon for the British Forces Foundation - https://www.justgiving.com/fundraising/sr5/ |
Appreciate
0
|
08-04-2019, 05:39 AM | #4 |
Lieutenant Colonel
810
Rep 1,704
Posts |
Yes this ^, Hammerite Smooth finish (rather than hammered) will paint straight over rust. Just get the loose bits off with a wire brush and paint it on the caliper whilst it is on the car. Comes in all colours. Easy.
Last edited by sensible; 08-04-2019 at 12:14 PM.. |
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|