05-08-2021, 03:53 PM | #1 |
New Member
0
Rep 19
Posts |
Locking the DME for New Flash
I was running BM3 and switched tunes yesterday. I flashed back to stock on BM3 but did not relock the DME. I then flashed the other tune onto the car.
When I tried to flash and lock the DME today for BM3 it wouldn’t let me. If I flash to stock and relock the DME using the new tuning software (MGFlasher), will I be able to then flash and relock BM3 to complete the transfer? Will I have any issues reflashing my new tune if I relock the DME?
__________________
Collin
Last edited by NotYourDads330; 05-08-2021 at 05:07 PM.. |
05-08-2021, 10:43 PM | #2 |
Colonel
1993
Rep 2,799
Posts
Drives: F33 430 and F39 M35i
Join Date: Feb 2009
Location: Cleveland, OH
|
Mgflasher should unlock it again.
Try mg flash to stock and lock. Use bm3 to unlock and flash a tune. . Then bm3 again to flash to stock and lock. Then mg to flash again. Else you can’t sell your bm3 assuming you are the first owner. |
Appreciate
1
NotYourDads3300.00 |
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|