[Donteflon]

I got a set of wheels coming in Wednesday & I'm looking for some input from anyone, but particularly from Firehawk Indy 500 users. How do these tires tend to run in terms of width? I have a set of 275/35r19 for my rears coupled with 245/40/19 on my front ordered. I don't mind ever so slight poke, but it is a concern. Consulted with alohasurftoad in the DMs (shoutout for the massive help), but per his advice would also like to seek community input. Thanks.

Car: '16 340i m-sport

Wheel specs: 19x8.5 et 35 19x9.5 et 38.

[Gen13 F36]

340i

19x9.5 et38... with 275/35, it will poke...lowered car will be alright.

Like...the oem 437m wheel has 19x10 et40. Poke so people order 265/35

[Donteflon]

Originally Posted by Gen13 F36

340i

19x9.5 et38... with 275/35, it will poke...lowered car will be alright.

Like...the oem 437m wheel has 19x10 et40. Poke so people order 265/35

Damn...I wasn’t planning on lowering till later. I’ll peep 437m on 275 and determine if the poke is too much.

Kinda bummed because I like that big booty look. Thanks, Gen.

Edit: I checked out 437m on an F30 that was 19x10 et 40 wrapped in 275/35, and that poke isn’t bad. It’d be less since I’m 9.5 with 2 mm difference in offset. I don’t know...what do you think, Gen13 F36 ?

[Gen13 F36]

Originally Posted by Donteflon

Damn...I wasn’t planning on lowering till later. I’ll peep 437m on 275 and determine if the poke is too much.

Kinda bummed because I like that big booty look. Thanks, Gen.

Edit: I checked out 437m on an F30 that was 19x10 et 40 wrapped in 275/35, and that poke isn’t bad. It’d be less since I’m 9.5 with 2 mm difference in offset. I don’t know...what do you think, Gen13 F36 ?

Exactly... poke is less on your setup...as I see some people run 9.5 width with et 35....with 275 tires.... maybe someone can chime in if they were going to rub... just my rough estimate....probably will not rub.

Do you have the budget for lower if rubbing issue . In paper it really look like a good setup

there some good examples on this thread

https://f30.bimmerpost.com/forums/sh....php?t=1166496

[alohasurftoad]

The rim lip will poke less and tire will poke 2mm more on the 9.5 +38 compared to the 19×10 +40

[NCG80M3]

I have this same rear setup on my 435 and I have not had any issues. I think it looks perfect with the 437M wheels. One of my buddies has the same size on his 335i. Check out his IG (grndtour_f30) He is also lowered on H&R springs. He might be on MPSS now tho. The Firestones seem to run a little wider

I did a review on these tires on my channel also if you are interested:

[Gen13 F36]

And don't forget to get fill the passenger seat with big booty Latina.... to complement the stance.