10-11-2021, 09:49 PM | #1 |
New Member
5
Rep 18
Posts |
2 piece rotors for 2/3/4 series (340X30 front rotor)
Hi Folks,
This rotor is used on a lot of cars as OEM. It is the 340 X 30 front rotor and can be found on variations of the following: F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 In talking with Mike @ GiroDisc, there is opportunity to build this rotor as a drop in replacement in a 2 piece rotor with aluminum hat and cast iron curved vane disc. He wants to see some interest though. I live in Washington about 2 hours away from their shop. I would be more than willing to drive up there so they could get any and every measurement they would need. I already have the drawing for the disc itself, but happy to do my part to make this happen. Mike is looking for commitment from 10 people to buy a set to do the work. My question: Who is interested in a 2 piece rotor design? Don't answer yes unless you are willing to buy. I want to be fair to Mike on this. I'm assuming in the $800-1000 range looking at the other rotors they do. So if you are interested, please PM me and put a comment in the post so others can see what interest there is. Thanks. |
10-11-2021, 10:09 PM | #2 |
Lieutenant Colonel
988
Rep 1,934
Posts |
Interesting. I had only found one place that made one in 340mm. Platz1 on eBay. Found them as an m4 thread purchesed a set in their OE size.
I am running them in the 340mm setup, fully floating.
__________________
F30 335iX | Remus Axleback | Fabspeed Catted DP | VRSF Comp IC | 18X9 ET35 19lb MT1 | 255/40/18 ECS | Ohlins RT Millway Street | Millway Control Arm Bushings | Turner Endlinks | TMH 75mm 14x1.5 Studs | BMW MPerf LSD | XDelete | Pipercross Filter | MHD Stg2 93
|
Appreciate
1
Onizukachan1026.00 |
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|