[shawnsheridan]

Originally Posted by ceejay_be

Started coding a few days ago, first VO coding 6NS, then some FDL coding.
Today I wanted to code rear DRL, but when I tried "Read Coding Data" from REM I got the following error :

REM [72] [F8108XX]
readCPS o.k.
cafd_000007a1-005_031_103 Fehler:
File for "cafd_000007a1-005_031_103" not found! [C012]

I-Step is F020-13-11-504, PSZData 51.3, so it should be working, right?
I guess I'm missing some CAFD file, but I have no idea where to get the right one.

Any ideas?

This is strange, as this CAFD as far as I know is not part of any PSdZData release. 51.3 added cafd_000007a1.caf.005_033_001, which is newer, and the version before it was cafd_000007a1.caf.005_031_003, which is older.

So, what you need to do then is as follows:

Connect => Read FA (VO) => Activate FA (VO) => Read SVT (VCM) => Left-Click on REM => Click on "Detect CAF for SWE" => Select CAFD cafd_000007a1.caf.005_033_001 => Select OK => Right-Click on REM (the ECU itself not the underlying CAFD) => Select CODE.

[ceejay_be]

Originally Posted by shawnsheridan

This is strange, as this CAFD as far as I know is not part of any PSdZData release. 51.3 added cafd_000007a1.caf.005_033_001, which is newer, and the version before it was cafd_000007a1.caf.005_031_003, which is older.

So, what you need to do then is as follows:

Connect => Read FA (VO) => Activate FA (VO) => Read SVT (VCM) => Left-Click on REM => Click on "Detect CAF for SWE" => Select CAFD cafd_000007a1.caf.005_033_001 => Select OK => Right-Click on REM (the ECU itself not the underlying CAFD) => Select CODE.

Thanks Shawn, that sorted it.

Another question : do you happen to have the pinout for the USB2 port on the NBT?
I VO-coded 6NS, and I ordered cable 61119322445 (nr. 1 here), which I think runs between USB2 on the NBT and the base plate in the armrest. Instead of connecting to the base plate I'm going to try and solder on a female USB2-port so I will have 2 USB ports in my armrest, one for the iPod for music, and one for the iPhone for apps.

Do you think that will work?

[ardyer]

Originally Posted by shawnsheridan

Are ysongaying that RDSofs off when you turn the car back on?

Is split view off all together, or it is still spit, but something other than RDS is displayed in small window?

It's off altogether. When start the car back up the will the radio station selection screen. It will be playing the previously selected station, it just won't show the previously selected RDS data. I have to go back and select it. It's the sane when playing MP3s. It defaults back to the top of the song list instead of the current track.

Re split view, I don't know that I've ever used that, I'll look into it.

[shawnsheridan]

Originally Posted by ceejay_be

Thanks Shawn, that sorted it.

Another question : do you happen to have the pinout for the USB2 port on the NBT?
I VO-coded 6NS, and I ordered cable 61119322445 (nr. 1 here), which I think runs between USB2 on the NBT and the base plate in the armrest. Instead of connecting to the base plate I'm going to try and solder on a female USB2-port so I will have 2 USB ports in my armrest, one for the iPod for music, and one for the iPhone for apps.

Do you think that will work?

No, sorry. I don't have it. In theory it should work, but no telling in BMW world.

[ardyer]

Originally Posted by shawnsheridan

Are you saying that RDS is off when you turn the car back on?

Is split view off all together, or it is still spit, but something other than RDS is displayed in small window?

Okay just played the system and I don't think I have the split screen option. I followed the instructions in the manual and there was no option for it. Is that part of the navigation package? If so I don't have nav either.

[bravosierra]

Hi guys...

I can't connect to my car any more. Thought my cable is broken, but I received another one today and I still have the same problem.
When I connect it takes about 2 minutes until a connection seems to be established (network logo with exclamation mark appears right of the taskbar), but zgwsearch.exe doesn't find any connection and e-sys doesn't either.
Any idea what the problem might be?

Ben

[shawnsheridan]

Originally Posted by ardyer

Okay just played the system and I don't think I have the split screen option. I followed the instructions in the manual and there was no option for it. Is that part of the navigation package? If so I don't have nav either.

Yes. Without Navigation, there is no reason to split the screen. Regardless, I would expect RDS to remain on, and I am surprised yours isn't.

[shawnsheridan]

Originally Posted by bravosierra

Hi guys...

I can't connect to my car any more. Thought my cable is broken, but I received another one today and I still have the same problem.
When I connect it takes about 2 minutes until a connection seems to be established (network logo with exclamation mark appears right of the taskbar), but zgwsearch.exe doesn't find any connection and e-sys doesn't either.
Any idea what the problem might be?

Ben

Laptop must not have Firewall or any Antivirus software running.

PC Lan Adapter should get a fallback IP address of 169.254.xxx.xxx (Make sure it is using DHCP and does not have a Static IP address assigned to it)

ZGW_Search does not matter. If you have 169.254.xxx.xxx IP Address, try and connect to the car.

[ardyer]

Originally Posted by shawnsheridan

Yes. Without Navigation, there is no reason to split the screen. Regardless, I would expect RDS to remain on, and I am surprised yours isn't.

Thanks for the information, sounds like this requires further research. And there doesn't seem to be a coding fix.

[marzali]

hi shawn,

need e-sys 3.23.4 or any other that works well with psdzdata 51.3..can u help please...

thanks in advance..

[shawnsheridan]

Originally Posted by marzali

hi shawn,

need e-sys 3.23.4 or any other that works well with psdzdata 51.3..can u help please...

thanks in advance..

You cant send or receive PM's yet. When you can, send me one with what you need.

[marzali]

sorry shawn

didnt know there was a limitation for that ..
would you mind telling me when am i able to receive pm's?

regards

[shawnsheridan]

After account is 24 hours old, you can use PM function.

[marzali]

ok..

just to let you know.. i have the psdzdata v51.3 files, about 28gb of it .. is that all i need after i get a compatible e-sys version or do i need any other files with it? may be the ediabas or something... sorry for my silly ques...i am just wondering if all ediabas files are same or is it version specific?

[shawnsheridan]

You do not need EDIABAS at all. You need only E-Sys with working Token solution and PSdZData.

[marzali]

k..
i will let you know when its past 24 hours..
its about after 2 hours really..

thanks

[ceejay_be]

Originally Posted by ceejay_be

Thanks Shawn, that sorted it.

Another question : do you happen to have the pinout for the USB2 port on the NBT?
I VO-coded 6NS, and I ordered cable 61119322445 (nr. 1 here), which I think runs between USB2 on the NBT and the base plate in the armrest. Instead of connecting to the base plate I'm going to try and solder on a female USB2-port so I will have 2 USB ports in my armrest, one for the iPod for music, and one for the iPhone for apps.

Do you think that will work?

Originally Posted by shawnsheridan

No, sorry. I don't have it. In theory it should work, but no telling in BMW world.

I can confirm that this does work, effectively adding a second USB port (6NH + coding) or replacing the baseplate/cradle with a USB port (6NS).

If anyone's interested I can make a thread with some pictures, I now have the iPod classic connected to the armrest USB for my music library, and a lightning connector by the ashtray to connect my iPhone for music/apps.

[marzali]

hi shawn

guess iam ok to receive pm's now.. would u be kind enough to pm me the link to e-sys and psdzdata files tht would work best to code f30 and f10..


thanks

[Edward557]

Hi,

I've just ordered this cable:
http://codecard.lt/electronics/tools.../prod_651.html

Hopefully this will suit my 2013 330d, can someone PM me info on the correct software I need to start coding my car?

Thanks for your help.

[shawnsheridan]

Originally Posted by marzali

hi shawn

guess iam ok to receive pm's now.. would u be kind enough to pm me the link to e-sys and psdzdata files tht would work best to code f30 and f10..


thanks

PM sent.

[shawnsheridan]

Originally Posted by Edward557

Hi,

I've just ordered this cable:
http://codecard.lt/electronics/tools.../prod_651.html

Hopefully this will suit my 2013 330d, can someone PM me info on the correct software I need to start coding my car?

Thanks for your help.

Yes, that is correct cable.

PM sent.

[shawnsheridan]

For those with CIC Head Unit's (PREMIUM Map), an early gift from BMW this year just landed:

Road Map North America PREMIUM 2014-2:



Available now only in 3 x 8 Gb USB / DVD version, although a single 16 Gb USB can be made to work if need be.