[anon10]

Title pretty much says it... It looks like ISTA-D will let me clear fault codes, but the message that pops up suggests it will clear all codes. Is there a way to clear individual fault codes (I have faults that were resolved, but still show as past events, I want to clear a couple of those), but leave the rest.

[anon10]

Bump. Really, no one out there knows?

[atzebmw]

Just tested this.
And no, i didn't found a way to clear single error codes.

[anon10]

Originally Posted by atzebmw

Just tested this. And no, i didn't found a way to clear single error codes.

Thanks for checking for me! That is surprising.

Does anybody know of a different tool or software that allows for clearing individual fault codes?

[houmr]

You can clear particular faults directly by corresponding ECU functions.

[anon10]

Many thanks to the two of you! Your advice worked great. I was able to clear the fault on a per ECU basis using that method. Not sure whether I would have been able to clear individual faults within a particular ECU, but I had only one fault on the ECU in question, and cleared it out successfully.