[kuba245]

Originally Posted by kubax86

Just code headlights with ECE FA.
If you have any problems, let me know, I will help.

Could you tell more about it ? I have to turn off the sidemarkers in front lamps in my f48 and I dont know which exact parameter is responsible for that.

[Almaretto]

Originally Posted by kuba245

Could you tell more about it ? I have to turn off the sidemarkers in front lamps in my f48 and I dont know which exact parameter is responsible for that.

It depends on which hardware is in car. Can you share ncd of light modules.

[kuba245]

Originally Posted by Almaretto

It depends on which hardware is in car. Can you share ncd of light modules.

In e-sys I found a few parameters linked with sidemarkers they are in BCU_BODY module parameter 3063. But I have no idea which parameter should to be change. Below is the print screen from e-sys and I attached the ncd file. Forgive my inexperience but I'm new in coding world.

[Almaretto]

Originally Posted by kuba245

In e-sys I found a few parameters linked with sidemarkers they are in BCU_BODY module parameter 3063. But I have no idea which parameter should to be change. Below is the print screen from e-sys and I attached the ncd file. Forgive my inexperience but I'm new in coding world.

So you have to tms or fle light modules?

[kuba245]

Originally Posted by Almaretto

So you have to tms or fle light modules?

I have FLE modules. I'm attaching NCD file from this module.

[kuba245]

I think problem solved. Coding is similar like in f15 but bit responsible for sidemarker is bit 5 not 4 like in f15. So to turn off the sidemarkers in f48 X1 you should change:

FLE43/3006/LM_ID_LT5: Change Werte=05 to Werte=00
FLE43/3006/LM5_Name: Change Werte=0C to Werte=00

FLE44/3006/LM_ID_LT5: Change Werte=05 to Werte=00
FLE44/3006/LM5_Name: Change Werte=0C to Werte=00

Changing this values turn off the sidemarkers in my BMW.

Analysis made by @stu14t helps me a lot with understatng what is happening in FLE module. I attached table witl LummB options which I made for my US f48. Maybe somebody for further coding

[Almaretto]

Originally Posted by kuba245

I think problem solved. Coding is similar like in f15 but bit responsible for sidemarker is bit 5 not 4 like in f15. So to turn off the sidemarkers in f48 X1 you should change:

FLE43/3006/LM_ID_LT5: Change Werte=05 to Werte=00
FLE43/3006/LM5_Name: Change Werte=0C to Werte=00

FLE44/3006/LM_ID_LT5: Change Werte=05 to Werte=00
FLE44/3006/LM5_Name: Change Werte=0C to Werte=00

Changing this values turn off the sidemarkers in my BMW.

Analysis made by @stu14t helps me a lot with understatng what is happening in FLE module. I attached table witl LummB options which I made for my US f48. Maybe somebody for further coding

Also change SIDEMRKLGT_Idx in addition to LM_ID_LT05 & LM05_Name

SIDEMRKLGT_Idx: 02, 02, 02, 02, 05, 02, 02
LmmIDx06_Intensity: 64 (100%)

[teymur88]

Originally Posted by Almaretto

It will vary by headlamp type. Older units will have larger orange/ yellow sidemarker:


Newer units, will only have 3 little lights, like my profile pic (my F010 with 552 LED Adaptive lights).

Hi. Where can I get full version of this document for F30? Which would cover all sections, not only headlamps electronics. Thanks.