10-15-2018, 08:26 PM | #1 |
Colonel
296
Rep 2,015
Posts |
OFHG HELP please
OK, I am trying to move the Intake Manifold and and removed all 7 x 11mm Nuts and 1 Bolt but the Manifold will not BUDGE.
NOT AT ALL. Also a NOTE: The 11 mm BOLT on 1st Intake was EXTREMELY Tight. It was tight till almost fully out. more than the 22nm torque specs....all the way. any ideas on what I missed? |
10-16-2018, 07:37 AM | #2 |
Major General
2465
Rep 5,457
Posts
Drives: F30
Join Date: Oct 2017
Location: Stevenson, WA
|
What engine?
|
Appreciate
0
|
10-16-2018, 09:09 AM | #3 |
Colonel
296
Rep 2,015
Posts |
Engine is a N55
Thanks for the reply, but I figured it out. It was my counting. I thought I took all 6 buts and 1 bolt out. But I missed the one behind the vacuum line. And it was a BOLT not a nut. Can someone confirm this. And my belly pan screws, All 8mm but 5 of them were 7mm. Does this sound right? |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|