11-17-2023, 09:50 AM | #1 |
Enlisted Member
0
Rep 30
Posts |
New LCI Headlights Retrofit and Coding Helping
Hello,
I have lci LED headlights, but the parking/daytime lights malfunction and turn off. How can I code it? I can use the ESYS program. Angel eyes do not work and I constantly get a warning that the parking/daytime lights are faulty. |
11-17-2023, 12:24 PM | #4 |
Enlisted Member
0
Rep 30
Posts |
Actually, the LCI headlights I use are direct plug-in. socket is one of those suitable for socket. I don't know how to delete or introduce the fault from the FemBody module
|
Appreciate
0
|
11-17-2023, 01:24 PM | #7 |
Enlisted Member
0
Rep 30
Posts |
I know how to use esys, activate fa, read svt and edit fembody cafd, then I don't know which module to enter and edit. mapping_standl? mapping_parkl? mapping_tagfahrl? Which one of these or which code should I change? Likewise, I cannot increase the LED brightness.
|
Appreciate
0
|
11-17-2023, 02:04 PM | #10 |
Banned
609
Rep 2,046
Posts |
Seems you dont know what you are asking for.
First do necessary steps for LCI headlight retrofit, confirm wiring, modify fa to match the LCI headlight,if there are still error then check the coding file. |
Appreciate
0
|
11-17-2023, 02:09 PM | #11 |
Enlisted Member
0
Rep 30
Posts |
I don't know how to pair it with lci headlights. Can you tell me the direct line of code and the command I need to change?
|
Appreciate
0
|
11-17-2023, 02:18 PM | #12 |
Banned
609
Rep 2,046
Posts |
What have you done so far?
The LCI has different date and typecode. Cant be sure since i dont have much infomramtion about the car. I can have a look at it and see what needs to be done. |
Appreciate
0
|
11-17-2023, 02:38 PM | #17 |
Enlisted Member
0
Rep 30
Posts |
I really don't know what to do. When I connect via cable, I activate a feature and it works, but after a day it goes off again and malfunctions. I couldn't solve the problem
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|