2012-2015 BMW 3-Series and 4-Series Forum
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read
BMW 3-Series and 4-Series Forum (F30 / F32) | F30POST > Technical Forums > F30 DIYs and Coding Discussions > Modifying items in FEM_BODY module
Post Reply
Thread Tools Search this Thread
      05-09-2019, 05:30 AM   #1
New Member

Drives: MY14 F30 320d
Join Date: Feb 2019
Location: Netherlands

iTrader: (0)

Modifying items in FEM_BODY module

I found out that in the FEM_BODY module (30D0 RemoteControl section) two items are -most likely- related to the TPMS system:

In the F3x's with standard equipped TPMS, bullet item a has a value of 'Werte_07 = 07' (channels 1, 2 and 3) and bullet item b has a value of 'Werte_00h = 00'.

I currently have these values:
Bullet item a ='Werte_03 = 03' (channels 1 and 2).
Bullet item b = 'Werte_69h = 69'.

It seems item a triggers a new channel to be monitored.
Am not quite sure though what item b does. The comment section says some things about HF fieldstrength. Perhaps the tolerances of the (acceptable) measured figures are lowered?

Anyone got an idea what these options do/ mean?
And has anyone got a clue if I can change these values in my car to the above mentioned ones without any risk?
Appreciate 0
Post Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -5. The time now is 12:33 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2022, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST