F30POST
F30POST
2012-2015 BMW 3-Series and 4-Series Forum
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read
BMW 3-Series and 4-Series Forum (F30 / F32) | F30POST > Technical Forums > Suspension | Chassis | Brakes > Millway Camber Plates
GetBMWParts
Post Reply
 
Thread Tools Search this Thread
      04-19-2019, 07:51 PM   #1
kern417
Cheapskate
United_States
1632
Rep
2,560
Posts

Drives: 2018 440i / 2010 X5
Join Date: Aug 2016
Location: Cincinnati

iTrader: (0)

Millway Camber Plates

Just got these delivered today. I ordered directly from Millway's website since I couldn't find any distributors in the USA and they were pretty cheap to begin with (currency conversion comes to less less than $380USD shipped from Sweden). They took exactly 2 weeks to get here. (ordered on 4/5).

http://www.millway.se/camber-plates-...0-f31-f32.html

I chose these because they are quite a bit cheaper than the other options from US companies. Millway sells replacement bearings in case they inevitably begin making rattling noises, but I've also seen some good reviews that mentioned they were completely silent. They are also the preferred camber plate for Ohlins so that was about all the motivation I needed to pull the trigger.

Everything was received in good shape and packaged well. I also ordered a millway sticker because it was like the equivalent of 10 cents, but they threw in about 10 extra no complaints.

http://www.millway.se/decal-millway-motorsport.html



They are pretty substantial in size and seem good quality. The only thing I don't like is that they use screws for mounting instead of nuts and studs. It'll be harder to line up this way but not impossible.





Install pics and initial impressions coming soon.
__________________
Quote:
Originally Posted by umizoomi View Post
As long as 3-pedals are an option, I will exercise my right to suffer the handicap and indignity of slower shifts and reaction times.
Appreciate 3
andino132.00
Wai32861.00
Logicoeur260.50

      04-21-2019, 01:23 AM   #2
FaRKle!
Major
United_States
740
Rep
1,195
Posts

Drives: '17 328d Sport Wagon
Join Date: Sep 2016
Location: Bay Area, CA

iTrader: (1)

Looking forward to your experience and if NVH increases (and what it's like).
Appreciate 0
      04-21-2019, 04:31 PM   #3
kern417
Cheapskate
United_States
1632
Rep
2,560
Posts

Drives: 2018 440i / 2010 X5
Join Date: Aug 2016
Location: Cincinnati

iTrader: (0)

Install went pretty smoothly. I forgot that our cars have alignment pins, and Millway includes those 2 set screws that act as locators when lifting the plates into position. So no issue with getting screws threaded.

The only real task is to swap the swivel bearing over from the bottom of your OEM bushings. See pic for reference. On their video, they easily pull it off the OEM part but I had to pry it off with a screw driver. You also have to determine with top nut works for yours. On my KW V1s, I needed the 12x1.25

Currently have it set to 0.5*ish over the factory setup, so I'm around 1.9* of camber. I did a DIY alignment in the garage and everything drives straight. We'll see how it holds up after I get some milage on the setup.





Hardware:


Before:


After:


Quote:
Originally Posted by FaRKle! View Post
Looking forward to your experience and if NVH increases (and what it's like).
So far there is slightly more NVH. I can feel and hear road imperfections that I didn't notice before. It's not jarring, but noticeable.

No rattling or metallic noises, but I only have all of 10 miles on the plates. We'll see how it's doing after a few months. They also sell replacement bearings, so it's nice to know I could swap them out if (When) it begins making noise in the future. The real question is how often that'll be. If it's every few years, I can deal with that.
__________________
Quote:
Originally Posted by umizoomi View Post
As long as 3-pedals are an option, I will exercise my right to suffer the handicap and indignity of slower shifts and reaction times.

Last edited by kern417; 04-23-2019 at 09:27 PM..
Appreciate 3
FaRKle!739.50
Logicoeur260.50
alexng72134.50

      04-23-2019, 12:20 AM   #4
alexng72
Lieutenant
United_States
135
Rep
449
Posts

Drives: 2015 F32 435i Black Msport
Join Date: Oct 2015
Location: Mason, OH

iTrader: (0)

Quote:
Originally Posted by kern417 View Post
Install went pretty smoothly. I forgot that our cars have alignment pins, and Millway includes those 2 set screws that act as locators when lifting the plates into position. So no issue with getting screws threaded.

The only real task is to swap the swivel bearing over from the bottom of your OEM bushings. See pic for reference. On their video, they easily pull it off the OEM part but I had to pry it off with a screw driver. You also have to determine with top nut works for yours. On my KW V1s, I needed the 12x1.25

Currently have it set to 0.5*ish over the factory setup, so I'm around 1.9* of camber. I did a DIY alignment in the garage and everything drives straight. We'll see how it holds up after I get some milage on the setup.




Hardware:


Before:


After:


Quote:
Originally Posted by FaRKle! View Post
Looking forward to your experience and if NVH increases (and what it's like).
So far there is slightly more NVH. I can feel and hear road imperfections that I didn't notice before. It's not jarring, but noticeable.

No rattling or metallic noises, but I only have all of 10 miles on the plates. We'll see how it's doing after a few months. They also sell replacement bearings, so it's nice to know I could swap them out if (When) it begins making noise in the future. The real question is how often that'll be. If it's every few years, I can deal with that.
That's exactly how I felt when I installed airbags. Now you can feel the mess on I-75 now haha
Appreciate 0
      04-23-2019, 06:04 AM   #5
kern417
Cheapskate
United_States
1632
Rep
2,560
Posts

Drives: 2018 440i / 2010 X5
Join Date: Aug 2016
Location: Cincinnati

iTrader: (0)

Quote:
Originally Posted by alexng72 View Post
That's exactly how I felt when I installed airbags. Now you can feel the mess on I-75 now haha
It's not fun but manageable. Like I can tell how recently the roads have been paved in different sections now lol. And still steer clear of potholes

I just think it's crazy that all of our camber plate options seem to be $550+. They should be way cheaper considering how wide the use is. These fit all F2x and F3x models. But I guess they just don't sell that many.
__________________
Quote:
Originally Posted by umizoomi View Post
As long as 3-pedals are an option, I will exercise my right to suffer the handicap and indignity of slower shifts and reaction times.

Last edited by kern417; 04-23-2019 at 09:21 PM..
Appreciate 1
Lancelot347.50

      04-23-2019, 09:31 AM   #6
alexng72
Lieutenant
United_States
135
Rep
449
Posts

Drives: 2015 F32 435i Black Msport
Join Date: Oct 2015
Location: Mason, OH

iTrader: (0)

I think the main reason is the quality of the ball bearing. I can feel the difference when I switch from universal bags to airlift bags. Their camber plates have different design and much better build quality. Anyway, great job on finding that plates, i was looking for one forever before I decided to go with airlift.
Appreciate 1
kern4171632.00

      04-23-2019, 04:11 PM   #7
Bee Pee
Brigadier General
United Kingdom
1097
Rep
3,692
Posts

Drives: AW M2 DCT
Join Date: Jun 2010
Location: SW London

iTrader: (3)

Quote:
Originally Posted by kern417 View Post
Quote:
Originally Posted by alexng72 View Post
That's exactly how I felt when I installed airbags. Now you can feel the mess on I-75 now haha
It's not fun but manageable. Like I can tell how recently the roads have been paved in different sections now lol. And still steer clear of potholes

I just think it's crazy that all of our camber plate options seem to be $550+. They should be way cheaper considering how wide the use is. These fit all F2x and F3x models, and even F87 models without the carbon strut brace. But I guess they just don't sell that many.
F87 Millway camber plates aren't the same as F2x and F3x.

F87 have same more robust bearing arrangement as m3/m4 to suit larger damper rod of monotube front struts.
__________________
Fettled M135i EB AT - gone but not forgotten:
AW M2 DCT
Appreciate 1
kern4171632.00

      04-23-2019, 09:21 PM   #8
kern417
Cheapskate
United_States
1632
Rep
2,560
Posts

Drives: 2018 440i / 2010 X5
Join Date: Aug 2016
Location: Cincinnati

iTrader: (0)

Quote:
Originally Posted by alexng72 View Post
I think the main reason is the quality of the ball bearing. I can feel the difference when I switch from universal bags to airlift bags. Their camber plates have different design and much better build quality. Anyway, great job on finding that plates, i was looking for one forever before I decided to go with airlift.
Yeah we'll see. I found these guys while researching SPL and other bearing options, and they appear to be very in tune with specific suspension offerings. I trust them, knowing that they offer bearings in various sizes to build your own a la carte suspension arms. And of course the lead time of several weeks indicates they're made to order.

Quote:
Originally Posted by Bee Pee View Post
F87 Millway camber plates aren't the same as F2x and F3x.

F87 have same more robust bearing arrangement as m3/m4 to suit larger damper rod of monotube front struts.
Corrected
__________________
Quote:
Originally Posted by umizoomi View Post
As long as 3-pedals are an option, I will exercise my right to suffer the handicap and indignity of slower shifts and reaction times.
Appreciate 0
      04-23-2019, 09:42 PM   #9
andino
Second Lieutenant
132
Rep
261
Posts

Drives: F31 328i xdrive
Join Date: Jan 2019
Location: norcal

iTrader: (0)

Super interested in these to see how they fair after some daily driving. I saw one guy on the m2 forums that had his on for about 2 years and they seemed to be okay with them.

Do you put a lot of miles on your car? Mine is a daily but I really only drive 2-3 times a week on average. My car mostly sees road trips and I'm planning to start tracking the car this year. Hopefully with my use case, these should fit right in!
__________________
2016 328ix F31 | Bilstein B14 PSS | MPBBK | ER Catted Downpipe | REMUS Sport Exhaust | VRSF Chargepipe | G-Plus FMIC | BM3 Stage 2 | K&N Drop In Filter | KC Front Strut Bar | Superpro camber bushings | BMS OCC | Millway Camber Plates | KMAC Monoball | KC RSB
Appreciate 0
      04-24-2019, 06:34 AM   #10
kern417
Cheapskate
United_States
1632
Rep
2,560
Posts

Drives: 2018 440i / 2010 X5
Join Date: Aug 2016
Location: Cincinnati

iTrader: (0)

Quote:
Originally Posted by andino View Post
Super interested in these to see how they fair after some daily driving. I saw one guy on the m2 forums that had his on for about 2 years and they seemed to be okay with them.

Do you put a lot of miles on your car? Mine is a daily but I really only drive 2-3 times a week on average. My car mostly sees road trips and I'm planning to start tracking the car this year. Hopefully with my use case, these should fit right in!
I don't, and I don't plan on tracking. This was primarily for wheel/tire fitment. I primarily drive in nice weather and never in snow (I only have 1 set of wheels with summer tires). I only put on about 5000 miles per year.

The bearing life all depends on your driving habits. More miles, more potholes, etc. will mean less life. I'm confident in these though, because others that I've had in the past have made metallic noises almost immediately. i was pleasantly surprised to have no noise on the Millway plates. That tells me right away that they're built properly.

And like I said, I have no problem if I have to replace the bearing every few years to keep it noise free. $60 is a no brainer.
http://www.millway.se/ge17-mte.html
__________________
Quote:
Originally Posted by umizoomi View Post
As long as 3-pedals are an option, I will exercise my right to suffer the handicap and indignity of slower shifts and reaction times.
Appreciate 1
andino132.00

      07-01-2019, 10:42 PM   #11
andino
Second Lieutenant
132
Rep
261
Posts

Drives: F31 328i xdrive
Join Date: Jan 2019
Location: norcal

iTrader: (0)

Been a couple months since you’ve installed; how are the plates holding up to your use?
__________________
2016 328ix F31 | Bilstein B14 PSS | MPBBK | ER Catted Downpipe | REMUS Sport Exhaust | VRSF Chargepipe | G-Plus FMIC | BM3 Stage 2 | K&N Drop In Filter | KC Front Strut Bar | Superpro camber bushings | BMS OCC | Millway Camber Plates | KMAC Monoball | KC RSB
Appreciate 0
      07-02-2019, 07:12 AM   #12
kern417
Cheapskate
United_States
1632
Rep
2,560
Posts

Drives: 2018 440i / 2010 X5
Join Date: Aug 2016
Location: Cincinnati

iTrader: (0)

Quote:
Originally Posted by andino View Post
Been a couple months since you’ve installed; how are the plates holding up to your use?
Still silent, but keep in mind I've only put on maybe 2k miles. I'm still keeping an eye on them for a true "long term" review.
__________________
Quote:
Originally Posted by umizoomi View Post
As long as 3-pedals are an option, I will exercise my right to suffer the handicap and indignity of slower shifts and reaction times.
Appreciate 2
andino132.00
Lancelot347.50

      07-02-2019, 04:43 PM   #13
andino
Second Lieutenant
132
Rep
261
Posts

Drives: F31 328i xdrive
Join Date: Jan 2019
Location: norcal

iTrader: (0)

Quote:
Originally Posted by kern417 View Post
Still silent, but keep in mind I've only put on maybe 2k miles. I'm still keeping an eye on them for a true "long term" review.
Thanks, I just put in an order for some myself. I drive a fair amount each month so I'll post about how they hold up to my use. Forgot to order an extra set of bearings but they're fairly inexpensive and will be easy to get later I'd imagine.
__________________
2016 328ix F31 | Bilstein B14 PSS | MPBBK | ER Catted Downpipe | REMUS Sport Exhaust | VRSF Chargepipe | G-Plus FMIC | BM3 Stage 2 | K&N Drop In Filter | KC Front Strut Bar | Superpro camber bushings | BMS OCC | Millway Camber Plates | KMAC Monoball | KC RSB
Appreciate 1
kern4171632.00

      07-11-2019, 06:25 PM   #14
thisismikeyb
Private
52
Rep
92
Posts

Drives: 2014 328i xDrive M-Sport EBII
Join Date: Jun 2013
Location: Maryland

iTrader: (0)

Just received mine today, should be installed Saturday morning as long as the Eibach springs come in. The saga continues as my friend says...
__________________
2014 328i xDrive M-Sport EBII--M-Sport Brakes w/Stoptech Pads--Full M-Performance Aero--Injen Intake--Active Autowerke Signature Exhaust--Bilstein B6 DampTronic w/ Dinan Springs+Shockware & M3 Bump Stops--Summer Apex FL-5 w/ MP4S 245/45 18x8.5et35--Winter Apex EC-7 w/Pilot Alpin PA4 245/45 18x8.5et35--BavSound Stage 1+Ghost Subs
Appreciate 1
kern4171632.00

      07-12-2019, 02:29 PM   #15
andino
Second Lieutenant
132
Rep
261
Posts

Drives: F31 328i xdrive
Join Date: Jan 2019
Location: norcal

iTrader: (0)

Hoping to get mine installed this weekend as well. Won't be able to dial in any camber until my monoball arrives though.
__________________
2016 328ix F31 | Bilstein B14 PSS | MPBBK | ER Catted Downpipe | REMUS Sport Exhaust | VRSF Chargepipe | G-Plus FMIC | BM3 Stage 2 | K&N Drop In Filter | KC Front Strut Bar | Superpro camber bushings | BMS OCC | Millway Camber Plates | KMAC Monoball | KC RSB
Appreciate 1
kern4171632.00

      07-14-2019, 01:58 AM   #16
andino
Second Lieutenant
132
Rep
261
Posts

Drives: F31 328i xdrive
Join Date: Jan 2019
Location: norcal

iTrader: (0)

I installed these today with my b14s and there's def more NVH over stock. The car feels way more nimble though with the solid mounts. Even the strut rotated more easily in the mounts. Very happy with them so far. I installed an RSB today as well and it was dark when I finished so no test drive or alignment yet. Will update again after some miles and after my monoball comes so I can get an alignment/corner balance.
__________________
2016 328ix F31 | Bilstein B14 PSS | MPBBK | ER Catted Downpipe | REMUS Sport Exhaust | VRSF Chargepipe | G-Plus FMIC | BM3 Stage 2 | K&N Drop In Filter | KC Front Strut Bar | Superpro camber bushings | BMS OCC | Millway Camber Plates | KMAC Monoball | KC RSB
Appreciate 1
kern4171632.00

      07-14-2019, 12:34 PM   #17
thisismikeyb
Private
52
Rep
92
Posts

Drives: 2014 328i xDrive M-Sport EBII
Join Date: Jun 2013
Location: Maryland

iTrader: (0)

Next weekend for me. The Eibach spring were delayed until Monday for delivery.
__________________
2014 328i xDrive M-Sport EBII--M-Sport Brakes w/Stoptech Pads--Full M-Performance Aero--Injen Intake--Active Autowerke Signature Exhaust--Bilstein B6 DampTronic w/ Dinan Springs+Shockware & M3 Bump Stops--Summer Apex FL-5 w/ MP4S 245/45 18x8.5et35--Winter Apex EC-7 w/Pilot Alpin PA4 245/45 18x8.5et35--BavSound Stage 1+Ghost Subs
Appreciate 2
andino132.00
kern4171632.00

      07-14-2019, 01:55 PM   #18
Pinkykillaz
New Member
Pinkykillaz's Avatar
14
Rep
12
Posts

Drives: 320i,eibach pro-kit
Join Date: Apr 2015
Location: Russia,Tver'

iTrader: (0)

45k km on them- no issues)
Appreciate 1
kern4171632.00

      07-15-2019, 03:07 AM   #19
kern417
Cheapskate
United_States
1632
Rep
2,560
Posts

Drives: 2018 440i / 2010 X5
Join Date: Aug 2016
Location: Cincinnati

iTrader: (0)

Awesome, glad to hear. Hopefully more people see them as a quality option.
__________________
Quote:
Originally Posted by umizoomi View Post
As long as 3-pedals are an option, I will exercise my right to suffer the handicap and indignity of slower shifts and reaction times.
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 04:55 PM.




f30post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST