05-31-2018, 09:47 AM | #1 |
E36M3 2/5 garage queen X3 3.0si
2
Rep 40
Posts |
F30 passenger blinker not working after Umnitza blackline tailight install
I put the lci black line tail lights in. They worked for hours while I was doing sales calls. Suddenly the right rear turn signal wouldn't work and started fast blinking like a bad bulb. So I messed around with it and realized no power at terminal connection for turn signal from factory passenger side outer harness. I disconnected battery waited 15 minutes and still doesn't work. I pulled bumper cover to check wiring. unwrapped factory tape, all looks good no corrosion or breaks. I put all the stock lights back in, disconnected battery waited 15 min and still doesn't work. Now my error comes on showing bad turn signal on passenger and L/R secondary break lights have errors. However, with the umnitza black line lci lights in car, as soon as I turn on, not start, the outer signal on pass outer blinks fast about 5 times, showing that the wire has continuity. Do I need to have a coding guy check things out? I'm stumpers. Please help.
|
05-31-2018, 11:10 AM | #3 |
E36M3 2/5 garage queen X3 3.0si
2
Rep 40
Posts |
They are LED. But they worked for probably 20 turn signal cycles while driving.
I guess i will have to find someone to do it, would dealer be able to do that?. I trust all who have 4000+ posts. |
Appreciate
0
|
06-03-2018, 06:53 AM | #5 |
New BMW owner
137
Rep 621
Posts
Drives: BMW 316d, BMW F40 116d
Join Date: Jan 2012
Location: Belgium
|
How do these tail lights look like...?
|
Appreciate
0
|
06-05-2018, 04:06 PM | #6 |
E36M3 2/5 garage queen X3 3.0si
2
Rep 40
Posts |
they looked great! Loved them until it messed up the REM (rear electronic module) my indy dealer said it was throwing intermittent code for everything it controls.
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|