F30POST
F30POST
2012-2015 BMW 3-Series and 4-Series Forum
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read
BMW 3-Series and 4-Series Forum (F30 / F32) | F30POST > Technical Forums > B58 Turbo Engine / Drivetrain / Exhaust Modifications > *** bootmod3 for BMW B58 - Now Available ***
GetBMWParts
Post Reply
 
Thread Tools Search this Thread
      04-03-2019, 09:01 AM   #1
proTUNING Freaks
BimmerPost Supporting Vendor
proTUNING Freaks's Avatar
3632
Rep
1,696
Posts


Drives: powered by bootmod3
Join Date: Oct 2014
Location: www.protuningfreaks.com | www.bootmod3.com

iTrader: (0)

*** bootmod3 for BMW B58 - Now Available ***

BIMMERPOST
     Featured on BIMMERPOST.com
bootmod3 closed beta for the B58 engines has been a great success and we're excited to announce the wait is finally over!

Our team has worked tirelessly on BMW B58 engine support adding support for all of bootmod3 features while programming the DME without removal from engine bay. Initial flash time that includes unlocking the DME is around 3 minutes and switching maps takes just 19 seconds using the standard ENET-OBD cable.

Licenses can be purchased by clicking on the link provided below:

https://www.protuningfreaks.com/coll...0i-m140i-m340i

B58 FEATURES INCLUDED WITH PURCHASE TODAY

- Exhaust Burble adjustment
- Cold Start (cat heating) disable
- Exhaust Flap adjustment
- Speed Limiter (VMAX) Removal
- Catalytic Monitors (CEL) on/off
- End User Map configuration for all maps
- Tuning Editor fur custom tuning
- Datalogging hundreds of data channels available and many more to come

Stage 1 91 octane: up to 18% HP / 26% TQ
Stage 1 93 octane: up to 20% HP / 26% TQ
Stage 2 91 octane: up to 24% HP / 32% TQ
Stage 2 93 octane: up to 26% HP / 32% TQ

Stage 2 AGG (Aggressive burble) versions of maps available
E30 and Race gas maps are on the way!

Current released OTS Maps make their peak power at just around 16-16.5psi so lots more to follow with higher octane OTS but also custom tuned maps by bootmod3 tuners.

With some B58s and bootmod3 custom tunes pushing B58s past 700whp already it'll be really fun to see where the platform takes us!

Attached Images
  
Appreciate 9
      04-03-2019, 09:09 AM   #2
kern417
Cheapskate
United_States
3137
Rep
4,229
Posts

Drives: 2018 440i / 2010 X5
Join Date: Aug 2016
Location: Cincinnati

iTrader: (1)

Awesome. I purchased and can't wait to flash when I get home.

I'm still on the fence on picking the stage 1 flash or going catless and picking stage 2. Is it that noticeable of a difference from stage 1 with stock hardware? Mainly I'm eager to flash now and not sure I want to deal with the smell either.
__________________
Quote:
Originally Posted by umizoomi View Post
As long as 3-pedals are an option, I will exercise my right to suffer the handicap and indignity of slower shifts and reaction times.
Instagram @kern417
Appreciate 2
      04-03-2019, 09:10 AM   #3
Halim@HCP
First Lieutenant
Halim@HCP's Avatar
Denmark
642
Rep
364
Posts

Drives: BMW F80 M3
Join Date: Oct 2016
Location: Denmark, Copenhagen

iTrader: (0)

Quote:
Originally Posted by kern417 View Post
Awesome. I purchased and can't wait to flash when I get home.

I'm still on the fence on picking the stage 1 flash or going catless and picking stage 2. Is it that noticeable of a difference from stage 1 with stock hardware? Mainly I'm eager to flash now and not sure I want to deal with the smell either.
There is approx 1.4 psi difference between the stage 1 and 2. Ofcourse the catless option also adds power
Appreciate 3
kern4173137.00
FSociety3470.50

      04-03-2019, 09:11 AM   #4
MTWO
Lieutenant
308
Rep
532
Posts

Drives: M2
Join Date: Dec 2016
Location: Innisfil

iTrader: (0)

Whoooooo! Now where my damn car at!!
Appreciate 0
      04-03-2019, 09:12 AM   #5
EricVR4
First Lieutenant
EricVR4's Avatar
United_States
352
Rep
389
Posts

Drives: 2018 M3 ZCP MPE
Join Date: Mar 2018
Location: Houston, TX

iTrader: (0)

Nice! Thank's y'all!

Since I'm new to the flashing world (sorry if this has been answered before), for those of us with MPPSK, when we do the unlock/flash and we need to flash back to stock for dealer visits, what happens? Will it flash back to the MPPSK tune or back to the original stock tune?

Also, any negatives to running Stage 2 with the stock cat and MPPSK exhaust?
Appreciate 0
      04-03-2019, 09:13 AM   #6
Halim@HCP
First Lieutenant
Halim@HCP's Avatar
Denmark
642
Rep
364
Posts

Drives: BMW F80 M3
Join Date: Oct 2016
Location: Denmark, Copenhagen

iTrader: (0)

Quote:
Originally Posted by EricVR4 View Post
Nice! Thank's y'all!

Since I'm new to the flashing world (sorry if this has been answered before), for those of us with MPPSK, when we do the unlock/flash and we need to flash back to stock for dealer visits, what happens? Will it flash back to the MPPSK tune or back to the original stock tune?
Bootmod3 compiles a stock map based on what is in your car, so basically your stock is MPPSK And whenever you flash to stock and lock, you're back on the MPPSK!

For stage 2 we recommend having a highflow downpipe. You can flash it and provide logs on a ticket, we can review it for you
Appreciate 4
EricVR4352.00
FSociety3470.50
RustyBitz1171.00
johnung1637.00

      04-03-2019, 09:16 AM   #7
EricVR4
First Lieutenant
EricVR4's Avatar
United_States
352
Rep
389
Posts

Drives: 2018 M3 ZCP MPE
Join Date: Mar 2018
Location: Houston, TX

iTrader: (0)

Quote:
Originally Posted by Halim@HCP View Post
Bootmod3 compiles a stock map based on what is in your car, so basically your stock is MPPSK And whenever you flash to stock and lock, you're back on the MPPSK!

For stage 2 we recommend having a highflow downpipe. You can flash it and provide logs on a ticket, we can review it for you
Much appreciated, thanks!
Appreciate 1
Halim@HCP641.50

      04-03-2019, 09:20 AM   #8
kern417
Cheapskate
United_States
3137
Rep
4,229
Posts

Drives: 2018 440i / 2010 X5
Join Date: Aug 2016
Location: Cincinnati

iTrader: (1)

Quote:
Originally Posted by Halim@HCP View Post
There is approx 1.4 psi difference between the stage 1 and 2. Ofcourse the catless option also adds power
Thanks. Also curious if any 6MT beta testers had to upgrade clutches, or did the stock clutch hold the power fine?
__________________
Quote:
Originally Posted by umizoomi View Post
As long as 3-pedals are an option, I will exercise my right to suffer the handicap and indignity of slower shifts and reaction times.
Instagram @kern417
Appreciate 0
      04-03-2019, 09:23 AM   #9
FSociety
@BMW_F9XM on IG
FSociety's Avatar
No_Country
3471
Rep
7,353
Posts

Drives: F98 X4MC, F90 M5, F80 M3 ZCP
Join Date: Apr 2012
Location: NYC NJ FL

iTrader: (3)

Garage List
Quote:
Originally Posted by kern417 View Post
Thanks. Also curious if any 6MT beta testers had to upgrade clutches, or did the stock clutch hold the power fine?
No need to upgrade clutches, BM3 OTS doesn't push your car over the limit
__________________
X4M Custom STG1+ 1/4m 10.64@130.92 60-130 7.5 WR
F98 X4M TristateBM3 STG2-- 1/4m 10.61@132mph -- 60-130: 7.3 -- 0-100mph: 10.20s WR

IG: @bmw_F9X

Appreciate 2
      04-03-2019, 09:54 AM   #10
Cookie933
New Member
0
Rep
6
Posts

Drives: F22 M240i
Join Date: Apr 2019
Location: Germany

iTrader: (0)

Hey guys, which are the MAX burble settings i can use with completly stock car and exhaust system?
Appreciate 0
      04-03-2019, 09:56 AM   #11
bm3tuning
Banned
bm3tuning's Avatar
United_States
65
Rep
93
Posts

Drives: F90 M5, F85 X5M, F80 M3
Join Date: Feb 2019
Location: Tristate NYC NJ PA CT

iTrader: (0)

Quote:
Originally Posted by Cookie933 View Post
Hey guys, which are the MAX burble settings i can use with completly stock car and exhaust system?
Stock car and stock exhaust should use STG1
Not recommended to go Max Burbles as well if you care about your turbos, but if you don't go ahead and the melt cat away
Appreciate 4
      04-03-2019, 09:59 AM   #12
Ahanix
Second Lieutenant
127
Rep
214
Posts

Drives: 2016 340i
Join Date: Dec 2018
Location: Utah, United States

iTrader: (0)

Given the 3 minute DME Unlock time, is there no longer a 'recommendation' to have your battery hooked to a tender during the unlock?
Appreciate 0
      04-03-2019, 09:59 AM   #13
Cookie933
New Member
0
Rep
6
Posts

Drives: F22 M240i
Join Date: Apr 2019
Location: Germany

iTrader: (0)

Quote:
Originally Posted by bootmod3nyc View Post
Stock car and stock exhaust should use STG1
Not recommended to go Max Burbles as well if you care about your turbos, but if you don't go ahead and the melt cat away
I know that i cant use max burbles Im asking which settings i can use to max it out for stock system
Appreciate 0
      04-03-2019, 10:05 AM   #14
j1980mac
Captain
United_States
226
Rep
933
Posts

Drives: 2018 X3 M40i
Join Date: Apr 2018
Location: Austin TX

iTrader: (0)

@proTUNING Freaks if someone is coming from another ECU/TCU tune, what would they need to do in order to load BM3 tunes?

If a DME is previously "unlocked", what's the protocol?
Appreciate 2
      04-03-2019, 10:14 AM   #15
Ahanix
Second Lieutenant
127
Rep
214
Posts

Drives: 2016 340i
Join Date: Dec 2018
Location: Utah, United States

iTrader: (0)

Is the DME Unlock + Initial flash just as fast using the Wifi Agent? Or would you recommend using the standard ENet Cable and a computer for the initial unlock?
Appreciate 0
      04-03-2019, 10:20 AM   #16
bmc340
Enlisted Member
United_States
17
Rep
39
Posts

Drives: 2016 340i xDrive
Join Date: Mar 2019
Location: NoVa

iTrader: (0)

Which plugs/gap are recommended for Stage 1 93 octane file? Are stock plugs/gap ok or is there a need for new plugs and/or gap?
Appreciate 0
      04-03-2019, 10:23 AM   #17
bm3tuning
Banned
bm3tuning's Avatar
United_States
65
Rep
93
Posts

Drives: F90 M5, F85 X5M, F80 M3
Join Date: Feb 2019
Location: Tristate NYC NJ PA CT

iTrader: (0)

Quote:
Originally Posted by Ahanix View Post
Given the 3 minute DME Unlock time, is there no longer a 'recommendation' to have your battery hooked to a tender during the unlock?
A good 20-30min drive to juice the battery up if climate is not under 30F should be good if the car is daily driven.
Appreciate 1
FSociety3470.50

      04-03-2019, 10:23 AM   #18
BPAC306
Second Lieutenant
BPAC306's Avatar
United_States
84
Rep
249
Posts

Drives: M240I X
Join Date: Jul 2016
Location: Chicago

iTrader: (0)

proTUNING Freaks

Will this change the sport display HP /TQ values?
are your dyno graphs displayed WHP or @ flywheel?
Can you clarify the peak boost pressure between stages? 16.5 max stage 2 seems low (a good thing!!!!)
__________________
M240i xdrive - K&N Drop in, MPE

12.3 @ 108 Stock
Appreciate 1
Powaup1111.50

      04-03-2019, 10:39 AM   #19
hybris
Lieutenant
hybris's Avatar
Norway
179
Rep
499
Posts

Drives: BMW 330e F30 M-sport
Join Date: Oct 2008
Location: Norway

iTrader: (0)

Garage List
Question to understand the different tune options:

Is the main difference between stage1 and 2 maps the boost?
And is the main difference between 91 and 93 octane maps the timing?
__________________
Thorbjorn
16 BMW F30 330e M-sport
Bootmod3 Stage2 / BMS Intake / RM Motors high flow catted downpipe & custom exhaust / BBS CH 19" / H&R Sport springs
Appreciate 0
      04-03-2019, 10:57 AM   #20
Ahanix
Second Lieutenant
127
Rep
214
Posts

Drives: 2016 340i
Join Date: Dec 2018
Location: Utah, United States

iTrader: (0)

Would I notice any difference at all using Stage 1 with a different Intake, or is the stock intake recommended?
Appreciate 1
      04-03-2019, 11:09 AM   #21
Halim@HCP
First Lieutenant
Halim@HCP's Avatar
Denmark
642
Rep
364
Posts

Drives: BMW F80 M3
Join Date: Oct 2016
Location: Denmark, Copenhagen

iTrader: (0)

Quote:
Originally Posted by hybris View Post
Question to understand the different tune options:

Is the main difference between stage1 and 2 maps the boost?
And is the main difference between 91 and 93 octane maps the timing?
Stage 2 maps have CEL off for downpipe, coldstart removed on default as well.

Boost on stage 1 and 2 is different, together with a different boost control to address the backpressure difference. 91 and 93 octane maps have a difference in ignition advance.
Appreciate 6
hybris178.50
kern4173137.00
hok02068.00
Powaup1111.50
FSociety3470.50

      04-03-2019, 11:14 AM   #22
hybris
Lieutenant
hybris's Avatar
Norway
179
Rep
499
Posts

Drives: BMW 330e F30 M-sport
Join Date: Oct 2008
Location: Norway

iTrader: (0)

Garage List
Quote:
Originally Posted by Halim@HCP View Post
Stage 2 maps have CEL off for downpipe, coldstart removed on default as well.

Boost on stage 1 and 2 is different, together with a different boost control to address the backpressure difference. 91 and 93 octane maps have a difference in ignition advance.
Thank you.

I realize this might be slightly off topic for this thread(?), will there be a separate thread for B48 perhaps? Anyway:

I assume this will be roughly similar on B48. Will downpipe be the only recommended mod for Stage2 on B48 as well? I'm running a 200cpi high flow cat, will that be fine for the Stage 2 map?
__________________
Thorbjorn
16 BMW F30 330e M-sport
Bootmod3 Stage2 / BMS Intake / RM Motors high flow catted downpipe & custom exhaust / BBS CH 19" / H&R Sport springs
Appreciate 0
Post Reply

Bookmarks

Tags
bm3, bootmod3

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 03:17 PM.




f30post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST