[LA1Z24]

Will my 2014 F32 without factory fogs have the required harness behind the front bumper cover to plug them in? Or do I need to install a harness as well?

[rifle2000]

Originally Posted by LA1Z24

Will my 2014 F32 without factory fogs have the required harness behind the front bumper cover to plug them in? Or do I need to install a harness as well?

You must check that but I think You need to install it.

[Jnursey]

Can anyone explain or know of a writeup to wire the harness in for those of us that dont already have fog lights installed?

Also does anyone have the PN for the harness? Also how will I be able to turn them on if there is no switch/button in my cabin for foglights currently?

[deusexe]

The problem after visiting the Dealership, I do not know what they mixed up with me, apart from updating the module, because until I turned on the fog, there was no error. Now, after driving 300km, I turned on the lights and there was a fog failure error. I checked it in coding and almost everything was fine except 3061- NSW_L_WARMUEBERWACHUNG; MAPPING_ABBIEGEL / NEBELSCHW_L / R_PWM_LEVEL 100% and NSW_L / R_UE_SPG_SCHUTZ (DIMMED). I coded everything correctly and I still have an error and in addition, welcome light with rings do not work.
And you can see the computer checking the bulbs still, because you can see the typical flashes before turning on the lamps. What else can I check?

[petterb]

I have done all the coding that has been written in this thread, but the cornering light function isn't working. Any ideas?

[Mizuuti]

I'll try on mine

[bossjerico]

Originally Posted by atzebmw

You will find it in expert mode under Front Electronic Module --> 3063_LceLampMapping2

And then don't forget to code both fog lights.

MAPPING_NEBELSCHW_L_PWM_LEVEL_1 100%. (default was 13.4V)
MAPPING_ABBIEGEL_L_PWM_LEVEL_1 100%. (default was 13.4V)

MAPPING_NEBELSCHW_R_PWM_LEVEL_1 100%. (default was 13.4V)
MAPPING_ABBIEGEL_R_PWM_LEVEL_1 100%. (default was 13.4V)

this worked on my car. thank you!