[BenZinF34]

Hi, please does anyone have an experience how to clear faults that still remain after ISTA clear faults procedure.

I have this- a short circuit to ground of the GPS aerial.

I have red that for the E-series by Tool32 can be cleared such faults, that have occurred 50 times and because of that the control unit has switched off the short circuit module.

I have tried by ISTA but the fault still remain.

Is there an unlock procedure to override the control unit and no matter the short circuit to restart the GPS aerial? With ISTA or E-SYS.

Thanks,

[BenZinF34]

Originally Posted by BenZinF34

Hi, please does anyone have an experience how to clear faults that still remain after ISTA clear faults procedure.

I have this- a short circuit to ground of the GPS aerial.

I have red that for the E-series by Tool32 can be cleared such faults, that have occurred 50 times and because of that the control unit has switched off the short circuit module.

I have tried by ISTA but the fault still remain.

Is there an unlock procedure to override the control unit and no matter the short circuit to restart the GPS aerial? With ISTA or E-SYS.

Thanks,

This is the ISTA report, had the SOS System failure, but have cleared it with BimmerCode sucessfully.

ISTA Fault Report