[jsk5599]

Hey guy, whats your opinion on the 437M reps. I love the style of them I think it will give some more visual weight over my 18'' 400M that came on the car. (13' 335i xDrive M sport)

So - for those that have 437M Rep's on their car have you had any issues, cast wheels aren't as strong as forged ones so I'm a little worried about a wheel failure at speed from a pot hole or something (i've cracked Forgestar Wheels before - not to throw shade at them)

The complicating factor is I have the wheel insurance, does anyone know if that applies to aftermarket wheels or just OEM wheels?

Thanks,

[Delete1]

Originally Posted by jsk5599

Hey guy, whats your opinion on the 437M reps. I love the style of them I think it will give some more visual weight over my 18'' 400M that came on the car. (13' 335i xDrive M sport)

So - for those that have 437M Rep's on their car have you had any issues, cast wheels aren't as strong as forged ones so I'm a little worried about a wheel failure at speed from a pot hole or something (i've cracked Forgestar Wheels before - not to throw shade at them)

The complicating factor is I have the wheel insurance, does anyone know if that applies to aftermarket wheels or just OEM wheels?

Thanks,

Same concern here NYC roads aren't forgiving

[yoandry]

I ordered mine last week from oemconcept. Will give it a try i guess. BMW OEM wheels are not all forged, so they do cast too.
Roads here are not that bad and I will use 40/35 tires to protect them more. Dont know about insurance but if they took a picture of your oem wheels, that's what they will cover not a different wheels even if they are oem.

[lo_xyooj]

Sub'd... yoandry let me know how it goes...Since i'm in winter mode and you're in FL, I'll probably be hitting you up for a review come April...

[yoandry]

Originally Posted by lo_xyooj

Sub'd... yoandry let me know how it goes...Since i'm in winter mode and you're in FL, I'll probably be hitting you up for a review come April...

Sure. Will keep you post

[GoodGuyAvi]

Hi guys ! Happy Holidays !

I got F32 Coupe (430i xdrive m-package) very like 437 reps from oem concept
Can someone help me out with tires and rims?

As I know they coming with front 8.5 rear 9.5 (im not sure what is ET/30/35/40 means

I would love to use 40/35 tires to protect them more....my researched stopped at this specs (but this one from f30 sedan)

235/40/19
265/35/19

Gentlemens need your help

[yoandry]

Originally Posted by AvetNY

Hi guys ! Happy Holidays !

I got F32 Coupe (430i xdrive m-package) very like 437 reps from oem concept
Can someone help me out with tires and rims?

As I know they coming with front 8.5 rear 9.5 (im not sure what is ET/30/35/40 means

I would love to use 40/35 tires to protect them more....my researched stopped at this specs (but this one from f30 sedan)

235/40/19
265/35/19

Gentlemens need your help

Hi there,
ET # means the measurement from center hub to the outside lip. So as low the number, more aggressive out will be.

I have mines for 5 months and I'm satisfy with the quality from OEMConcert.
Im using the 19x8.5 et35 front 19x9.5 et40 with 235/40/19 & 265/35/19 MPSS.

[GCinFLA]

Surface Quality of Roads in Naples FL and NJ have nothing in common.

Hit a few NJ potholes per mile with 437m Reps and then compare them to OEM.

[sicmadek]

Originally Posted by yoandry

Hi there,
ET # means the measurement from center hub to the outside lip. So as low the number, more aggressive out will be.

I have mines for 5 months and I'm satisfy with the quality from OEMConcert.
Im using the 19x8.5 et35 front 19x9.5 et40 with 235/40/19 & 265/35/19 MPSS.

Springs or coilovers?

[mwalter14]

Have a set of OEMConcept 437m Reps in 18 x 8.5 ET35 w/ 235/40/18 square setup. So far no complaints. Smooth ride and comfortabe and smooth over rough patches of roads..

[OEMconcept]

When people think replica wheels, they think shitty construction, heavy, poor quality and cheap (eBay replicas). That's what most vendors sell, but not ours.

Our 437M wheels are low-pressure cast, the same manufacturing process of most high end aftermarket wheels sold on here (Avant Garde, Stance, VMR etc..) All our wheels are JWL and VIA certified.

Wheels aren't indestructible. You can spend $5-6k on forged wheels and they will still bend on the right pothole. I'm not saying that these are as strong as forged wheels, but the reality is that they're not far off.

[yoandry]

Originally Posted by GCinFLA

Surface Quality of Roads in Naples FL and NJ have nothing in common.

Hit a few NJ potholes per mile with 437m Reps and then compare them to OEM.

Im not comparing them with OEM. Eitherway, if you take care of them as I do you wont have a problem. Now, if you dont, then even the OEM will break. Remember that not all OEM wheels are forged. BMW use cast wheels too.
If I want it to hit a few potholes at high speed, then that's what the black jeep is for.

[yoandry]

Originally Posted by sicmadek

Springs or coilovers?

None of them.

I have the M Performance suspension.

Originally Posted by OEMconcept

When people think replica wheels, they think shitty construction, heavy, poor quality and cheap (eBay replicas). That's what most vendors sell, but not ours.

Our 437M wheels are low-pressure cast, the same manufacturing process of most high end aftermarket wheels sold on here (Avant Garde, Stance, VMR etc..) All our wheels are JWL and VIA certified.

Wheels aren't indestructible. You can spend $5-6k on forged wheels and they will still bend on the right pothole. I'm not saying that these are as strong as forged wheels, but the reality is that they're not far off.

Amen

[Alpine3s]

Resurrecting an old thread, sorry if this upsets anyone.

Looking to get the 437M reps, but OEM concepts inbox is full. Can anyone lead me in the right direction ?

[Llep64]

Plus one here..

[bmw5858]

Plus 2 here..

If someone sell 437m reps, here is 3 easy sell! Cmon! Haha

[terryd5150]

Originally Posted by bmw5858

Plus 2 here..

If someone sell 437m reps, here is 3 easy sell! Cmon! Haha

Make that four. Lol.

[overkill1125]

What happened to OEM Concept?

[classyfast]

Originally Posted by overkill1125

What happened to OEM Concept?

Lol prob shut down for selling reps!!!

[Alpine3s]

Seems the only company which carriers anything close and can re-sale is 1010Tires. They have a set online for sale, but it doesn't seem to be from the Canadian company I had looked up and called. They wont sell to public anyway, plus the only reseller they worked with was 1010tires.

I gave up on my 437M search and decided to go with Niche 19's. I hope those dont fall apart and have quality materials.

P.S Just an update, the brand was called Replika

https://www.awside.com/collections/5...wheel-black-19

[f30_Imperial]

Found this on Facebook Marketplace. Not sure if he ships or not but worth the try. He has different colors too.

https://www.facebook.com/marketplace...04470549705568