07-04-2019, 04:52 PM | #1 |
New Member
3
Rep 8
Posts |
Easy way to make the exhaust on my 2019 430i have popping/crackle sounds?
Hi, so I got a new 2019 BMW 430i about 6 months ago as a lease and I was wondering if there is a simple mod or something thats not permanent to have the exhaust on my car make a bit more sound like crackles or pops :P
I have Bimmercode and I used that too get automatic folding mirrors working, is there maybe something I could configure in Bimmercode to "disable" the electronic shut off thing that cuts the fuel from going to the exhaust?(I dont know what it is specifically) The only time the exhaust makes a nice pop is when I floor it right before I switch gears when the RPM is around 4k-5k Is there a trick to get the exhaust to crackle/pop while driving or revving? I watched a video on how to do it but it doesnt seem to work for me, when I am at lets say... 3k RPM on second gear, if I let go of the gas and wait a second for the revs to go down then press slightly on the gas again, the car doesnt make any sound and just slightly speeds up? Maybe I am doing it wrong...? Thats what the video said you should do and showed an example of it working on a 328i. -Thanks! |
07-05-2019, 01:50 PM | #4 |
Captain
373
Rep 937
Posts |
It's the same concept with the N55... just free up the exhaust. Easiest and cheapest IMO is delete resonators.
When I got the MPE and deleted my resonator there was no drone, so it should be the same with N20 especially with stock motor!
__________________
Hi
|
Appreciate
0
|
07-05-2019, 11:05 PM | #5 |
New Member
3
Rep 8
Posts |
Thanks! I will call up my dealer and see if they will allow this since my car is a lease.... If not, then oh well I guess...
|
Appreciate
0
|
07-06-2019, 08:36 PM | #6 |
Captain
373
Rep 937
Posts |
Haha they will most definitely say no
__________________
Hi
|
Appreciate
0
|
Post Reply |
Bookmarks |
Tags |
430i, exhaust, noise |
|
|