[atzebmw]

Originally Posted by deneyer

Its the part number for an f34 (usa build) cause didn't found a europe version ùaybe thats the problem


no idea on how to do that and i also have the light version of pdsz and not the full

Here is the flashing guide:

http://www.bmwesys.com/guides/E-Sys%...CU%20Guide.pdf

You need to flash only the RDC ecu.

And here you can find the Full-psdzdata:

https://mega.nz/#!gOAxDAJZ!Un90yZ_LP...BTdlocO_zSIMkc

[deneyer]

Originally Posted by atzebmw

Here is the flashing guide:

http://www.bmwesys.com/guides/E-Sys%...CU%20Guide.pdf

You need to flash only the RDC ecu.

And here you can find the Full-psdzdata:

https://mega.nz/#!gOAxDAJZ!Un90yZ_LP...BTdlocO_zSIMkc

i don't have a mega account and im not gonna pay for a subscription to download 1 thing

[Davef30hull]

Originally Posted by atzebmw

The ...227 should come from an F10.

So you can try the following:
Start E-Sys and connect your car as an F10.
Then the usual read FA and read VCM.
After that mark the RDC ecu and try to "detect caf for swe".
If it works without errors choose a CAFD and hit OK.
BUT NOW DON'T CODE THE ECU!!!
Don't close E-Sys but disconnect the connection.
Connect again as your car series.
and again read FA and VCM.
The RDC should now still have the assigned CAFD.
Now only code the RDC ecu with the assigned CAFD.

If that doesn't work you also can flash the RDC ecu and after that you should also be able to assign a CAFD.

I hope that was understandable.

Thanks for your help with this. Tried to change to f10 from f30 but still got the same error. Speaking with Shawn he says these are not code able however I see some people are managing to inject the cafd and code successfully. Never done ecu flashing before but up for giving a try. As it's just the rdc module I would be flashing could I do this without a power supply? I'm guessing the only risk would be to the rdc module itself?

[atzebmw]

Originally Posted by Davef30hull

Thanks for your help with this. Tried to change to f10 from f30 but still got the same error. Speaking with Shawn he says these are not code able however I see some people are managing to inject the cafd and code successfully. Never done ecu flashing before but up for giving a try. As it's just the rdc module I would be flashing could I do this without a power supply? I'm guessing the only risk would be to the rdc module itself?

This worked for me in 2016 when i was retrofitting the RDC.
I think for flashing the RDC ecu there's no power supply required.
And yes, the only risk is the RDC module itself.

[deneyer]

Originally Posted by atzebmw

Here is the flashing guide:

http://www.bmwesys.com/guides/E-Sys%...CU%20Guide.pdf

You need to flash only the RDC ecu.

And here you can find the Full-psdzdata:

https://mega.nz/#!gOAxDAJZ!Un90yZ_LP...BTdlocO_zSIMkc

I downloaded the full version did a flash with the guide

RESULT is still the same no cafd can be injected

[Davef30hull]

Originally Posted by deneyer

I downloaded the full version did a flash with the guide

RESULT is still the same no cafd can be injected

Hmm looks like we're both in the same boat

[Davef30hull]

Originally Posted by haris_k

Yes the RDC ecu was also coded after adding 2vb to the VO.

Apparently I am doing something wrong coding, though I cannot understand what that is.
Do you think you can guide me through?

I'm in the same boat did you resolve yours at all?

[atzebmw]

Originally Posted by deneyer

I downloaded the full version did a flash with the guide

RESULT is still the same no cafd can be injected

Flash duration only 3s.
That sounds a bit short.

But now i have no other idea.
Maybe you can ask shawnsheridan.

[Davef30hull]

Originally Posted by atzebmw

Flash duration only 3s.
That sounds a bit short.

But now i have no other idea.
Maybe you can ask shawnsheridan.

Shawn informs me the rdc ecu cannot be coded.

[atzebmw]

Originally Posted by Davef30hull

Shawn informs me the rdc ecu cannot be coded.

But it‘s the same (36106876227) like i was retrofitting and i could code it.

https://f30.bimmerpost.com/forums/sh...76&postcount=6

[Davef30hull]

Originally Posted by atzebmw

But it's the same (36106876227) like i was retrofitting and i could code it.

https://f30.bimmerpost.com/forums/sh...76&postcount=6

I'm desperately remaining hopeful there will be a way. I bought the same ones as you based on your success. Seems very hit and miss. I am wondering what those of us who can't code it have in common with each other, and the same with those that can. My vehicle is a MY2013 F30.

The crazy thing is once errors are cleared it all works albeit briefly.

[deneyer]

I used module 36106853736

[Davef30hull]

I'm

[Drimacus]

This post is make me confused:

I have a 07/2012 (build date) F31 Luxury.

Can someone tell me what are the right part numbers for F31 EURO Version to make it work RDC?


Thank you!

[atzebmw]

Originally Posted by Drimacus

This post is make me confused:

I have a 07/2012 (build date) F31 Luxury.

Can someone tell me what are the right part numbers for F31 EURO Version to make it work RDC?


Thank you!

36106856227 and
36106876227

[Drimacus]

The orange one?

Realoem tells are not for f31!

[Drimacus]

And the same for the ECU!

5' F07 GT   (09/2008 — 06/2013)
5' F07 GT LCI   (08/2012 — 02/2017)
5' F10   (01/2009 — 10/2016)
5' F10 LCI   (08/2012 — 10/2016)
5' F11   (01/2009 — 06/2013)
5' F11 LCI   (08/2012 — 02/2017)
6' F06 Gran Coupé   (05/2011 — 03/2015)
6' F06 Gran Coupé LCI   (05/2014 — 07/2018)
6' F12   (10/2009 — 02/2015)
6' F12 LCI   (05/2014 — 05/2018)
6' F13   (03/2010 — 02/2015)
6' F13 LCI   (05/2014 — 10/2017)
7' F01   (06/2007 — 06/2012)
7' F01 LCI   (05/2011 — 05/2015)
7' F02   (07/2007 — 06/2012)
7' F02 LCI   (05/2011 — 05/2015)
7' F04 Hybrid   (10/2008 — 06/2012)
X3 F25   (06/2009 — 08/2017)
X4 F26   (05/2013 — 03/2018)
Ghost RR4   (08/2008 — 08/2018)
Wraith RR5   (11/2012 — 08/2018)
Dawn RR6   (04/2015 — 08/2018)

[atzebmw]

Originally Posted by Drimacus

The orange one?

Realoem tells are not for f31!

Yes, that‘s right.
But it works also for F31.
Like i said here (page 1 of this thread)
https://f30.bimmerpost.com/forums/sh...76&postcount=6

[Davef30hull]

Mine hasn't worked I'm absolutely gutted. I should have chosen the correct parts for my 2013 f30. I just don't understand why some have success and some don't with exactly the same part numbers. I just cannot inject a cafd into the rdc module. I'd even offer a reward to anyone who can help me get mine working.

Shawn also confirms its not possible.

[Drimacus]

Originally Posted by atzebmw

Yes, that‘s right.
But it works also for F31.
Like i said here (page 1 of this thread)
https://f30.bimmerpost.com/forums/sh...76&postcount=6

Does it neeed flash?

[Davef30hull]

Some things to add car is MY2013. Rdc module is 2015. Istep is 2014.

[Drimacus]

I Bought the parts that used Larrybml.

It's better solution.