04-10-2024, 09:23 AM | #1 |
Enlisted Member
8
Rep 41
Posts |
Bilstein B8 Performance Plus + H&R Sport Springs w/ EDC delete?
Hey guys.
Looking to do some suspension upgrades. I want to stay away from coils to keep some practicality for daily driving, so my plan was to just grab some H&R sport springs and call it a day. However, when my engine was getting replaced, the master tech told me my shocks were blown out an that he recommended a rebuild. So my new plan is going with the Bilstein B8 Performance Plus kit paired with some H&R Sport Springs. However, my car is equipped with EDC. In order to keep this feature, I would have to spend over twice the amount than I would with no EDC, so my plan is to delete it. My car is currently under warranty and I am unable to mess with the ECU so coding is out of the option, which leaves me with the hardwire kit. I've read a few posts that the b8 doesn't have a bracket for the hardwire kits. Is this true? Is it possible to mount it elsewhere? I also found two different options that seem the same, but one of these I see everyone installing, the other I haven't seen a single post about. Is the second link just an updated model? Which one would you recommend? 1st Link - https://www.turnermotorsport.com/p-341685-tms341685/ 2nd Link - https://www.bimmerworld.com/KW-EDC-C...22-X3-F25.html Also, just want to quadruple check before I buy them, These are all compatible with my F30 2013 335i M Sport w/ M Sport brakes and EDC correct? https://www.ecstuning.com/b-h-and-r-...s-set/28878-2/ https://rb.gy/f277ln Let me know what you all think. Any help is much appreciated! |
Post Reply |
Bookmarks |
|
|