10-15-2014, 06:46 PM | #1 |
19
Rep 141
Posts |
Modified Torin jack stands for BMW jack points with integrated vehicle jack pocket
Reverse Logic offers modified Torin T43004 aluminum jack stands with blocks that fit directly into the jack points on BMW chassis. Supporting the car from inside the vehicle jack pockets avoids damaging the jack points.
The price of $109.95/pair includes shipping to any destination in the USA. For forum members who already have a set of the Torin (or equivalent) aluminum jack stands we also sell the anodized aluminum blocks separately with M10x1.5 bolts for $31.95/pair including shipping. It's necessary to drill a 10mm hole into the saddle of the jack stands to use the blocks. The jack stands will also fit MINI, late model Mercedes-Benz, and Nissan GT-R jack points. http://www.reverselogic.us/shop.html...tegory=4643108 Last edited by Fred@ReverseLogic; 11-03-2014 at 07:54 AM.. |
|
10-18-2014, 09:45 AM | #2 |
19
Rep 141
Posts |
Anodized blocks for Torin stands
Here's a photo showing the two choices we offer for attaching the blocks to the Torin stands. The blocks can be attached with a 55mm long M10x1.5 bolt coming up through the inner post tube. Alternatively, headless M10 bolts can be used to pin the blocks in place on the top of the saddle.
The blocks are available separately for customers who are able to drill a 10mm hole through the saddle of the Torin stands. The smaller locating hole is for use on our jack pad tools. A dowel pin keeps the blocks from spinning on the jack pad tool base. On the jack stand the "ears" on the saddle prevent the block from rotating. http://www.reverselogic.us/shop.html...air/p/21024208 |
Appreciate
0
|
12-13-2014, 02:50 PM | #3 |
19
Rep 141
Posts |
Reverse Logic will be phasing out the Torin T43004 aluminum stands when our current stock is depleted. Some of the stands in stock are less than perfect. Either the tubes and/or blocks are scratched. The stands with cosmetic blems are being sold for $90. Regular price is $110. Prices include shipping to any destination in the USA.
http://www.reverselogic.us/shop.html...tegory=5495089 |
Appreciate
0
|
03-09-2015, 12:54 PM | #4 |
19
Rep 141
Posts |
I am now sold out of modified Torin stands. I will continue to offer the blocks for DIYers who are able to drill the holes in the jack stand saddles themselves. I am looking into making an after market post for the Torin stands which would incorporate the pivoting block like the custom posts I currently offer for ESCO jack stands.
|
Appreciate
0
|
Bookmarks |
|
|