F30POST
F30POST
2012-2015 BMW 3-Series and 4-Series Forum
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read
BMW 3-Series and 4-Series Forum (F30 / F32) | F30POST > Technical Forums > F30 DIYs and Coding Discussions > Need help coding out front pdc
European Auto Source (EAS)
Post Reply
 
Thread Tools Search this Thread
      08-13-2019, 11:25 AM   #1
jaypayne05
Private
United_States
6
Rep
77
Posts

Drives: 435i Gran Coupe M Package
Join Date: Sep 2018
Location: Orlando

iTrader: (0)

Need help coding out front pdc

Ok I'm new to this coding thing, my pdc front sensors keep malfunctioning and I want to just turn them off and keep my back ones working. I'm just tired of replacing them and clicking to turn off the warnings. It's a 2015 435 grand coupe. I have sides and back up camera also I would like to keep the cameras on. How do I code this out.
__________________
435i M Package, VRSF FMIC, VRSF CP, MHD stage 2+, stock cat
Appreciate 0
      08-14-2019, 11:26 AM   #2
atzebmw
Major
Germany
234
Rep
1,089
Posts

Drives: BMW 335XD F30 LCI
Join Date: May 2016
Location: Germany

iTrader: (0)

Change the "508" in your VO to "507" and code the REM and HU with it.
Appreciate 1
      08-14-2019, 11:45 AM   #3
jaypayne05
Private
United_States
6
Rep
77
Posts

Drives: 435i Gran Coupe M Package
Join Date: Sep 2018
Location: Orlando

iTrader: (0)

Quote:
Originally Posted by atzebmw View Post
Change the "508" in your VO to "507" and code the REM and HU with it.
So I use BimmerCode for my coding. So I have to go in to the rear electronic module and replace 508 with 507 and also the head unit. What is VO? I'm not too familiar with that
__________________
435i M Package, VRSF FMIC, VRSF CP, MHD stage 2+, stock cat
Appreciate 0
      08-14-2019, 12:42 PM   #4
atzebmw
Major
Germany
234
Rep
1,089
Posts

Drives: BMW 335XD F30 LCI
Join Date: May 2016
Location: Germany

iTrader: (0)

Quote:
Originally Posted by jaypayne05 View Post
So I use BimmerCode for my coding. So I have to go in to the rear electronic module and replace 508 with 507 and also the head unit. What is VO? I'm not too familiar with that
Ah OK.
VO is the vehicle order which you can't edit with Bimmercode.
No, if you use Bimmercode then go another way.

Try to change the following values if you find them:

in REM:
PdcParkMasterVar 3203 > A_HYSTERESE = wert_02 to wert_01
PdcParkMasterVar 3203 > D_SCHWELLE_1 = wert_02 to wert_01
PdcParkMasterVar 3203 > D_SCHWELLE_2 = wert_02 to wert_01
PdcParkMasterVar 3203 > V_SCHWELLE_1 = wert_02 to wert_01
PdcParkMasterVar 3203 > V_SCHWELLE_2 = wert_02 to wert_01
PdcVarCoding 3200 > PDC_VARIANT = wert_02 to wert_01

in HU

EXBOX 3001 > PDC_SENSOR_VORN = 4_sensoren to kein_Sensor
Appreciate 1
      08-14-2019, 08:15 PM   #5
jaypayne05
Private
United_States
6
Rep
77
Posts

Drives: 435i Gran Coupe M Package
Join Date: Sep 2018
Location: Orlando

iTrader: (0)

Quote:
Originally Posted by atzebmw View Post
Quote:
Originally Posted by jaypayne05 View Post
So I use BimmerCode for my coding. So I have to go in to the rear electronic module and replace 508 with 507 and also the head unit. What is VO? I'm not too familiar with that
Ah OK.
VO is the vehicle order which you can't edit with Bimmercode.
No, if you use Bimmercode then go another way.

Try to change the following values if you find them:

in REM:
PdcParkMasterVar 3203 > A_HYSTERESE = wert_02 to wert_01
PdcParkMasterVar 3203 > D_SCHWELLE_1 = wert_02 to wert_01
PdcParkMasterVar 3203 > D_SCHWELLE_2 = wert_02 to wert_01
PdcParkMasterVar 3203 > V_SCHWELLE_1 = wert_02 to wert_01
PdcParkMasterVar 3203 > V_SCHWELLE_2 = wert_02 to wert_01
PdcVarCoding 3200 > PDC_VARIANT = wert_02 to wert_01

in HU

EXBOX 3001 > PDC_SENSOR_VORN = 4_sensoren to kein_Sensor
Ok thanks I will try that and report back
__________________
435i M Package, VRSF FMIC, VRSF CP, MHD stage 2+, stock cat
Appreciate 0
      08-14-2019, 08:52 PM   #6
jaypayne05
Private
United_States
6
Rep
77
Posts

Drives: 435i Gran Coupe M Package
Join Date: Sep 2018
Location: Orlando

iTrader: (0)

Quote:
Originally Posted by atzebmw View Post
Quote:
Originally Posted by jaypayne05 View Post
So I use BimmerCode for my coding. So I have to go in to the rear electronic module and replace 508 with 507 and also the head unit. What is VO? I'm not too familiar with that
Ah OK.
VO is the vehicle order which you can't edit with Bimmercode.
No, if you use Bimmercode then go another way.

Try to change the following values if you find them:

in REM:
PdcParkMasterVar 3203 > A_HYSTERESE = wert_02 to wert_01
PdcParkMasterVar 3203 > D_SCHWELLE_1 = wert_02 to wert_01
PdcParkMasterVar 3203 > D_SCHWELLE_2 = wert_02 to wert_01
PdcParkMasterVar 3203 > V_SCHWELLE_1 = wert_02 to wert_01
PdcParkMasterVar 3203 > V_SCHWELLE_2 = wert_02 to wert_01
PdcVarCoding 3200 > PDC_VARIANT = wert_02 to wert_01

in HU

EXBOX 3001 > PDC_SENSOR_VORN = 4_sensoren to kein_Sensor
So I did it and it worked perfectly. Thank you very much.
__________________
435i M Package, VRSF FMIC, VRSF CP, MHD stage 2+, stock cat
Appreciate 1
atzebmw233.50

Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 01:42 PM.




f30post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST