[Bcallecruz]

I've try to get an inspection but for some
Reason I keep getting this message above !
Once connected to OBD and hit yes to continue it brings me back to the same message . I have no tune .
I took the car to dealer where i bought it from about 2 months ago and they say they never saw this message before.
Can anybody help?

[BimR]

Can you not have the dealership do the inspection? It's kinda ridiculous that they claim they can't do anything about this!

[dmanb2b]

Just have them click yes...if your stock, you have nothing to worry about

[thejeremyman9]

Did you buy the car new? If not, are you confident the DME software is 100% OEM?

[Bcallecruz]

Originally Posted by BimR

Can you not have the dealership do the inspection? It's kinda ridiculous that they claim they can't do anything about this!

The car is pre owned I bought it at a Nj dealership but I have it registered in NY
. It's a state inspection

[Bcallecruz]

Originally Posted by thejeremyman9

Did you buy the car new? If not, are you confident the DME software is 100% OEM?

I did not buy the car new . It's a 2018 pre owned from Canada… how can I check the oem software??
I did get CarPlay activated by coding

[BimR]

Originally Posted by Bcallecruz

The car is pre owned I bought it at a Nj dealership but I have it registered in NY
. It's a state inspection

Nooooo! Hope it's not the NJ guys scamming you. Can you tell me which dealserhip? I'm sorry man.

[Billfitz]

The message says that the data isn't as expected. That doesn't mean that it's an automatic fail, it means that it's not an automatic pass. Click 'Yes', find out what the issue is and have it checked out.

[thejeremyman9]

Originally Posted by Bcallecruz

I did not buy the car new . It's a 2018 pre owned from Canada… how can I check the oem software??
I did get CarPlay activated by coding

Well, just speculation here, but it may be possible that the car being from Canada is a factor. There's multiple different software versions/levels even if the "tune" is effectively the same, so if they are doing a check similar to the CalID CVN checks, maybe its not recognizing whatever it came with from Canada. I'm also in the boat of just click yes, and the dealer should be responsible for making it pass... in California you can even sell a car without making sure it will pass emissions.

[HarryTee]

Originally Posted by Billfitz

The message says that the data isn't as expected. That doesn't mean that it's an automatic fail, it means that it's not an automatic pass. Click 'Yes', find out what the issue is and have it checked out.

The PO did that & it went in circle.

[LA1Z24]

NY inspector here. I plug in 5+ cars a day for the last 15+ years. Have never seen this message.

Does the registration sticker have the same VIN as the vehicle itself? The machine will flag inspections if the PCM vin does not match what was scanned with the bar code reader. Also what about the door jam vin sticker...Does that match also? Sometimes if you can't get the registration on the windshield to scan, you can scan the barcode on the door jam sticker.

[Billfitz]

Originally Posted by Bcallecruz

I did get CarPlay activated by coding

The dealer you bought it from would have inspected it. If the only change to the car since then was what you coded then that's probably the issue.

[Bcallecruz]

Originally Posted by Billfitz

The message says that the data isn't as expected. That doesn't mean that it's an automatic fail, it means that it's not an automatic pass. Click 'Yes', find out what the issue is and have it checked out.

Once I hit yes it just load up and then take me back to the same error screen

[Bcallecruz]

Originally Posted by LA1Z24

NY inspector here. I plug in 5+ cars a day for the last 15+ years. Have never seen this message.

Does the registration sticker have the same VIN as the vehicle itself? The machine will flag inspections if the PCM vin does not match what was scanned with the bar code reader. Also what about the door jam vin sticker...Does that match also? Sometimes if you can't get the registration on the windshield to scan, you can scan the barcode on the door jam sticker.

Yes , VIN number is accurate .
I also went to the DMV and they checked all info and it seems to be right

[LA1Z24]

Originally Posted by Bcallecruz

Yes , VIN number is accurate .
I also went to the DMV and they checked all info and it seems to be right

Next step is to call Opus, the company that NYS has contracted to run the NYSI program.

1-866-623-8378 or 1-866-497-8477

[auburnf30x]

Quick question...and forgive me ahead of time if it is an ignorant one, my state doesn't do inspections so I have no idea how the process works.

Are you getting it connected to the same machine every time you get this error? If so, it could be an issue with that particular one's hardware/software, maybe taking it to a different one would fix the problem.

Like I said, if that makes no sense or is dumber than hell, just ignore me and move on.

[Bcallecruz]

Originally Posted by LA1Z24

Next step is to call Opus, the company that NYS has contracted to run the NYSI program.

1-866-623-8378 or 1-866-497-8477

I will proceed to do that , thank you I'm advance and will keep u updated

[2018BMWissues]

I have the same problem and same facts. Canada imported and coded carplay using Bimmer Remote coding. Any solution? Thanks!

[schernov]

Originally Posted by 2018BMWissues

I have the same problem and same facts. Canada imported and coded carplay using Bimmer Remote coding. Any solution? Thanks!

Canadian cars and us cars are the same except for couple VO codes. Emissions stuff is the same.

This is most likely due to CarPlay coding. Unit cannot read your faults from headunit. Roll back CarPlay to stock and try again.