05-31-2023, 05:02 AM | #1 |
Private
23
Rep 66
Posts |
Opinions please
Im going to have my rocker panels wrapped in gloss black. Should I do the entire panel, or just have them done the same as the OEM M Performance rocker panels where only the side skirting is black?
I was leaning toward getting the whole panel done, but Im now thinking that it might be too much. Car is mineral gray. Pic for illustration. Thoughts? |
05-31-2023, 07:54 AM | #2 |
Colonel
967
Rep 2,654
Posts |
Go OEM style. The whole rocker panel is going to just look off… I’m debating on doing mine as well. How much are they charging if you don’t mind my asking?
__________________
2016 340i xDrive - BM3 Stage 2 93 OTS - xHP Transmission Tune Stage 2 - B58TU HPFP - Bilstein B14 - VRSF Catless DP - Kyostar CAI
|
Appreciate
1
Voodoo1823.00 |
05-31-2023, 08:25 AM | #4 | |
Private
23
Rep 66
Posts |
Quote:
He's a good kid, an Eagle Scout, so I know that if it's not perfect, it isn't from a lack of effort, but rather a lack of experience. I figure worst case scenario, I have it redone in a year or two or as long as I can tolerate it, and I've helped a good kid out. |
|
Appreciate
0
|
05-31-2023, 08:53 AM | #5 |
Mr OEM
658
Rep 80
Posts
Drives: 2012 BMW 335i
Join Date: May 2023
Location: Mbombela
|
OEM for sure!
|
Appreciate
0
|
05-31-2023, 10:32 AM | #6 |
Lieutenant General
8245
Rep 16,083
Posts |
While you've got them off consider lining them with this, which will reduce rattling caused by the underseat woofers: https://www.amazon.com/dp/B0BKPGKL79...WxfdGhlbWF0aWM
I've got it in my doors and any other interior panels that I had reason to remove at some point. |
Appreciate
1
Voodoo1823.00 |
Post Reply |
Bookmarks |
|
|