[bimmer456]

Pretty lame you can't have dsc like an s drive car.

[Stanio]

Originally Posted by bimmer456

Pretty lame you can't have dsc like an s drive car.

I guess we don't have anyone on the forum to confirm what the coding option will do....shame.

[IARLLC]

Setting up a 435i Xdrive for drifting (not my idea). Working out the complications.
1. Was just going to pull fuse #32 but this sounds better
2. They pulled the rear ABS sensors to install hand-brake calipers, have to take signal from front or disable DSC and ABS completely
3. installed a manual trans so coding that auto out tomorrow I hope

Very open to good ideas. Somewhat open to other ideas too

[Logicoeur]

There's a mobile app, xHP Flash tool that will be able to do this for us. It's new release date is tomorrow, Monday. It was pushed back from sometime in December. It's already being used in the E9x.


Edit: it's a completely different app from the same company. xDelete is the application.

[floridaorange]

https://f30.bimmerpost.com/forums/sh...tocar+code+out

[IARLLC]

Thanks for that link. I had not found that one yet. We'll see if I can:
1. code it like a non-xdrive (so no dsc/abs lights)
2. mirror the front ABS sensor signals for the back
3. auto to manual coding
4. default dsc/abs off

Gunna be interesting

[noor hamad]

Originally Posted by EL CHAMO

Can our f30 xDrive be disabled so the car is RWD for donuts and burnout?

would this work on my 2018 330i ?

[rekin]

News
https://play.google.com/store/apps/d...tuning.xDelete

[Logicoeur]

Originally Posted by rekin

News
https://play.google.com/store/apps/d...tuning.xDelete

No support for F3x yet.

[Uwrwilke]

Originally Posted by Logicoeur

No support for F3x yet.

Support is now in.

[F30Drew]

I'm subscribed to Bryan_KiesMotorsports on Youtube and he posted this a couple weeks ago. All info in description on the video.

[csayad]

Does pulling the fuse still work on a 2018 340i xdrive??? If so will I have problems like the car being stuck in limp mode or will I just have little light in the dash on?

[shadowx360]

Originally Posted by WhoisCalvin

Does pulling the fuse still work on a 2018 340i xdrive??? If so will I have problems like the car being stuck in limp mode or will I just have little light in the dash on?

Just code the car, much better than pulling the fuse. DSC > C_Funktion_LaengsMomentVerteilung_aktiv_e > aktiv change to nicht_aktiv. You have to change VCM so DSC has a build code for a non-xDrive.

[AddVance]

Do you have a VCM build code for a non xdrive that will work for my F31 sportwagon 328D? I’m tired of seeing the Chasis Stabilization warning light on all the time.

[danyro]

it should be doable by manipulating only the software via FDL coding

comparison between s28i and x28i US version.
No other car optionals have been taken in consideration(like Hill descent control etc).
An example for my F25 but it should be the same for F1x/3x/4x/etc


XDRIVE

DXC_CT01 > DSC_CODIERDATEN_ALLGEMEIN 3000 > C_Cp_Hinterachse = initwert [Default]
DXC_CT01 > DSC_CODIERDATEN_ALLGEMEIN 3000 > C_Cp_Vorderachse = initwert [Default]
DXC_CT01 > DSC_CODIERDATEN_ALLGEMEIN 3000 > C_Funktion_HillDescentControl_aktiv_I = aktiv_mph
DXC_CT01 > DSC_CODIERDATEN_ALLGEMEIN 3000 > C_Funktion_LaengsMomentVerteilung_aktiv_e = Allrad [Default]
DXC_CT01 > DSC_CODIERDATEN_ALLGEMEIN 3000 > C_Funktion_OHB_BFS_aktiv_I = inaktiv [Default]
DXC_CT01 > DSC_CODIERDATEN_ALLGEMEIN 3000 > C_Funktion_OHB_BPS_aktiv_I = inaktiv [Default]
DXC_CT01 > DSC_CODIERDATEN_ALLGEMEIN 3000 > C_Variante_Antrieb_e = Allrad [Default]
DXC_CT01 > DSC_CODIERDATEN_ALLGEMEIN 3000 > C_Variante_Karosserie_e = F25_Basis
DXC_CT01 > DSC_CODIERDATEN_ALLGEMEIN 3000 > C_Variante_Motor_e = Wert_01
DXC_CT01 > DSC_CODIERDATEN_LIEFERANT_CONTI 3004 > C_BBV_Korrekturfaktor_HA_c = Wert_03 [Default]
DXC_CT01 > DSC_CODIERDATEN_LIEFERANT_CONTI 3004 > C_BBV_Korrekturfaktor_VA_c = Wert_03 [Default]
DXC_CT01 > DSC_CODIERDATEN_LIEFERANT_CONTI 3004 > C_GMR_Uebersteuer_0_c = 4WD
DXC_CT01 > DSC_CODIERDATEN_LIEFERANT_CONTI 3004 > C_GMR_Uebersteuer_1_2_c = 4WD



SDRIVE

DXC_CT01 > DSC_CODIERDATEN_ALLGEMEIN 3000 > C_AllradAktuator_Schutzfunktion = inaktiv
DXC_CT01 > DSC_CODIERDATEN_ALLGEMEIN 3000 > C_Cp_Hinterachse = initwert [Default]
DXC_CT01 > DSC_CODIERDATEN_ALLGEMEIN 3000 > C_Cp_Vorderachse = initwert [Default]
DXC_CT01 > DSC_CODIERDATEN_ALLGEMEIN 3000 > C_Funktion_HillDescentControl_aktiv_I = nicht aktiv [Default]
DXC_CT01 > DSC_CODIERDATEN_ALLGEMEIN 3000 > C_Funktion_LaengsMomentVerteilung_aktiv_e = Heck
DXC_CT01 > DSC_CODIERDATEN_ALLGEMEIN 3000 > C_Funktion_OHB_BFS_aktiv_I = inaktiv [Default]
DXC_CT01 > DSC_CODIERDATEN_ALLGEMEIN 3000 > C_Funktion_OHB_BPS_aktiv_I = inaktiv [Default]
DXC_CT01 > DSC_CODIERDATEN_ALLGEMEIN 3000 > C_Variante_Antrieb_e = Heck
DXC_CT01 > DSC_CODIERDATEN_ALLGEMEIN 3000 > C_Variante_Karosserie_e = F25_Basis
DXC_CT01 > DSC_CODIERDATEN_ALLGEMEIN 3000 > C_Variante_Motor_e = Wert_06
DXC_CT01 > DSC_CODIERDATEN_LIEFERANT_CONTI 3004 > C_BBV_Korrekturfaktor_HA_c = Wert_03 [Default]
DXC_CT01 > DSC_CODIERDATEN_LIEFERANT_CONTI 3004 > C_BBV_Korrekturfaktor_VA_c = Wert_03 [Default]
DXC_CT01 > DSC_CODIERDATEN_LIEFERANT_CONTI 3004 > C_GMR_Uebersteuer_0_c = 2WD
DXC_CT01 > DSC_CODIERDATEN_LIEFERANT_CONTI 3004 > C_GMR_Uebersteuer_1_2_c = 2WD

[macman_lahti]

I know this is quite old topic but have anyone managed to change car production model so car is not giving DSC errors ? I'm also getting ABS error, still haven't tested if ABS still working even error comes.

[macman_lahti]

Originally Posted by macman_lahti

I know this is quite old topic but have anyone managed to change car production model so car is not giving DSC errors ? I'm also getting ABS error, still haven't tested if ABS still working even error comes.

ABS is not working. Brakes are locking.

[COSBimmer2]

Sending out the driveshaft for servicing, so will try the fuse trick to see if the car can be driven at all or if this is all a cruel joke. Hoping it's real!