03-03-2021, 04:28 AM | #1 |
Private
17
Rep 87
Posts
Drives: 2014 335i Xdrive
Join Date: Dec 2020
Location: Ontario
|
Do I need to reset transmission adaptions?
Planning to change my transmission fluid and have read mixed reviews over reseting adaptions after changing the fluid.
Do I really need to reset adaptions? Will it damage the transmission if i dont reset adaptions after fluid change? 2014 335i xDrive 8AT |
03-03-2021, 07:30 AM | #2 |
Lieutenant Colonel
878
Rep 1,686
Posts
Drives: 2014 428i and 2018 X5
Join Date: Mar 2017
Location: Buford, GA
|
No
__________________
___________________ 2014 F32 428i M-Sport 2018 F15 M-Sport |
Appreciate
0
|
03-04-2021, 09:03 PM | #4 |
Captain
400
Rep 605
Posts |
Just the filter and fluid change shouldn't need adaption reset. But if you're changing mechatronic solenoids & mechatronic sealing sleeves then I would say yes.
|
Appreciate
0
|
03-05-2021, 06:41 AM | #6 |
Lieutenant Colonel
878
Rep 1,686
Posts
Drives: 2014 428i and 2018 X5
Join Date: Mar 2017
Location: Buford, GA
|
You don't need to do that either.
__________________
___________________ 2014 F32 428i M-Sport 2018 F15 M-Sport |
Appreciate
0
|
03-05-2021, 07:38 AM | #7 |
New Member
6
Rep 14
Posts |
I'm sure many/most have gotten by without doing it, and it is somewhat unclear what it does. That being said, the Bently manual specifically mentions resetting adaptations after fluid change. I did it...
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|