06-26-2022, 06:33 AM | #1 |
Enlisted Member
3
Rep 45
Posts |
Hi all,
I have tried to code the LCD panel on my 6WA to stay white at night. I believe I've coded it right. I've changed the KOMBI>3007>DIM_NACHT_EIN value from 0x08 as it was to 0xFF but it is still orange at night. Have I done something wrong or missed a code somewhere? Edit: I've done some more research and apparently this will only work on cars with firmware upto 2014. My car is a 2012 but I had all the modules firmware's updated to the latest versions when I had the 6WA dash retro fitted. I have found this on another forum via Googling "There is another way but requires a hack to the light sensor which makes the car switch from day to night, all you need to do is flip the light sensor to look into the housing (rear view mirror) instead of through the windshield and mount a small white LED to provide light for the sensor and it will think its day all the time" Has anyone tried this? Would this not also stop the auto headlights from functionality properly? Or are they operated from a separate source? |
Post Reply |
Bookmarks |
|
|