F30POST
F30POST
2012-2015 BMW 3-Series and 4-Series Forum
BMW Garage BMW Meets Register Today's Posts
BMW 3-Series and 4-Series Forum (F30 / F32) | F30POST > Technical Forums > B58 Turbo Engine / Drivetrain / Exhaust Modifications > Log review - WGDC% oscillation
ARMA SPEED
Post Reply
 
Thread Tools Search this Thread
      03-26-2024, 03:10 PM   #1
chrxme
New Member
0
Rep
8
Posts

Drives: 2018 BMW 340i xDrive
Join Date: Jan 2022
Location: Ohio

iTrader: (0)

Log review - WGDC% oscillation

I have been working with my tuner to dial in a custom tune for the last 2 months now and for some odd reason I have been running into wgdc issues intermittently. I have a BMW 340i xDrive with a DAW Flowmax+ v2.5, Dorch 2.5 hpfp (E40), Dinan closed air intake, and a catless downpipe.

My tuner is confused because one log will look great and after some minimal changes for a new revision, the new logs show wgdc all over the place. I have done multiple smoke tests to check for boosts leaks and the intake side is fine. I only see a bit of smoke coming from the CCV side of the turbo inlet connection but not much since there’s no seal on that connection. I’m confused as to why some logs look fine and others will show wgdc and boost oscillations.

I have attached my last two revisions to show this issue, the first log looks much better than the latest one. These two revisions were consecutive.

2nd to last log:
https://www.bootmod3.net/log?id=6601...363507f17d2889

Latest log:
https://www.bootmod3.net/log?id=6603...4b1d45a7be8fe1

I would love to hear any ideas on what my issue could be since I have been scratching my head for the last couple weeks.
Appreciate 0
      03-26-2024, 06:49 PM   #2
WrxToBeamerGuy
Captain
WrxToBeamerGuy's Avatar
492
Rep
950
Posts

Drives: BMW 340i xDrive
Join Date: Dec 2019
Location: Utah

iTrader: (0)

Quote:
Originally Posted by chrxme View Post
I have been working with my tuner to dial in a custom tune for the last 2 months now and for some odd reason I have been running into wgdc issues intermittently. I have a BMW 340i xDrive with a DAW Flowmax+ v2.5, Dorch 2.5 hpfp (E40), Dinan closed air intake, and a catless downpipe.

My tuner is confused because one log will look great and after some minimal changes for a new revision, the new logs show wgdc all over the place. I have done multiple smoke tests to check for boosts leaks and the intake side is fine. I only see a bit of smoke coming from the CCV side of the turbo inlet connection but not much since there’s no seal on that connection. I’m confused as to why some logs look fine and others will show wgdc and boost oscillations.

I have attached my last two revisions to show this issue, the first log looks much better than the latest one. These two revisions were consecutive.

2nd to last log:
https://www.bootmod3.net/log?id=6601...363507f17d2889

Latest log:
https://www.bootmod3.net/log?id=6603...4b1d45a7be8fe1

I would love to hear any ideas on what my issue could be since I have been scratching my head for the last couple weeks.
Ask him if he increases the I-Gain table in his tune. Oscillations can be caused by an I-Gain that is set too high.
__________________
Dustin Braun @ Braun Performance Tuning
Appreciate 0
Post Reply

Bookmarks

Tags
boost leak, logs, wgdc


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 06:45 AM.




f30post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST