07-14-2019, 11:58 AM | #1 |
Second Lieutenant
86
Rep 293
Posts |
Everything needed to get ID6 in a 2013 F31
Hi all,
Hoping someone could confirm that I am getting on the right bits to upgrade my 2013 F31 to have iDrive 6/Carplay. Currently have Professional Nav. From what I can work out, I need to: Get NBT Evo (v4.1 or higher) with touch screen and new touch controller Have it coded to my vehicle Get an ATM module plus cables to replace my current Telematics module Swap SIMs between the two Add two WLAN antenna Have I missed anything? Assume my headup, cameras and Logic 7 will all work fine with the new head unit? Thanks in advance |
07-17-2019, 11:11 AM | #3 |
Lieutenant
197
Rep 536
Posts |
You will need an ATM wiring loom. Dont need the new screen if you want to use old nbt one. Rest needed are all software fsc etc. Everything else works pnp.
The loom comes with a gps extender. Also just need one wifi antenna. I have opened a TCB and ATM both and not found anything swappable. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|