[xpro]

Originally Posted by Ibo24

Just a question.
Did you press SAVE FA to car in the VCM tab?

Just to confirm this? Is the write FA FP is what you mean?

Im thinking I might have skipped this step

[shawnsheridan]

Originally Posted by xpro

It is set as per Shawns instruction.

So don't understand how VCM is giving old VO still?

Thanks so much

If the Update VCM Option is checked, and you VO Code any ECU, the FA Activated at that time is written to VCM. Period, end of story. Maybe the FA you have activated is not as you think it is.

[xpro]

Update:

Got it working 3rd time lucky
Thanks again to @shawnsheridan @atzebmw & Ibo24 for massive help!!

Flashed ZGW, FEM Body, HU_NBT2 and ATM

All working fine after VO coding the NBT module and then the flash only consisted of CAFDdeploy as I already flashed to latest Istep.


One thing, my CP is only half screen and other half is greyed out with no option to split screen? How can I make this go full screen?

And the last issue was which I still have , when I read FA from VCM I get unknown symbol as you can see in the photo. But if I read the FA from Coding section, the unknown symbol isnt there?
Is this maybe an Esys 3.30 limitation? Shawn do you have the latest version of Esys maybe? Thanks

And as Shawn stated, maybe my FA was incorrect, but the only thing I had there was 6CP,6NS &6NR which I removed.

Please see the screenshot and thanks again

And just the last photo was taken from Launcher just to see what the unknown was and its still the same

[Ibo24]

If everything works like it should, why worry?

[xpro]

Originally Posted by Ibo24

If everything works like it should, why worry?

I guess so. I give up anyways..

Ps: Any tips on how to enable full screen CP ?

[Ibo24]

That would be patching it.
Paid solution

[Ahmaddoski]

Hello, u coded ID 4 to Idrive 6 am i right ? If so can you lead me on how to do it because i searched alot couldn't find the method anywhere

[xpro]

Originally Posted by Ahmaddoski

Hello, u coded ID 4 to Idrive 6 am i right ? If so can you lead me on how to do it because i searched alot couldn't find the method anywhere

Hi, No this is the ID5 unit. I just flashed the latest software update.

I don't think you can convert id4 to id5 without hardware

[xpro]

Just incase anyone is interested, I monitored the Voltage and Amps during the flash.

It was in excess of 50AMP anyways.

Heres the screenshot of the current draw ( Green )

[Ibo24]

Just a small question.

I recently updated a NBT EVO ID5 to latest psdzdata.

Before the car was flashed, I had a black screen.
After flash, still black screen!

Can’t code either.
Flash was finished.

[xpro]

Originally Posted by Ibo24

Just a small question.

I recently updated a NBT EVO ID5 to latest psdzdata.

Before the car was flashed, I had a black screen.
After flash, still black screen!

Can’t code either.
Flash was finished.

What error did you get?

[shawnsheridan]

Originally Posted by Ibo24

Just a small question.

I recently updated a NBT EVO ID5 to latest psdzdata.

Before the car was flashed, I had a black screen.
After flash, still black screen!

Can’t code either.
Flash was finished.

IF you have BLANK SCREEN issue - this means that your resolution or size is not set correctly. And if you have APIX1 Screen to keep APIX working on id5/6 you need to flash it 18-03-xxx max else you get black screen issue.

[Ibo24]

The car was delivered to me with a black screen.
Sound etc were all working though.

I have flashed it to 18-03-504

I cannot read the fdl either.
Perhaps you could watch over Teamviewer?

[shawnsheridan]

Originally Posted by Ibo24

The car was delivered to me with a black screen.
Sound etc were all working though.

I have flashed it to 18-03-504

I cannot read the fdl either.
Perhaps you could watch over Teamviewer?

Sorry, I am without TeamViewer access.

Why cant you read FDL? Does NBT2 have CAFD or it is missing?

[Ibo24]

There is no cafd available.

[shawnsheridan]

Originally Posted by Ibo24

There is no cafd available.

So Inject CAFD and VO Code it. Must use E-Sys 3.3x for this.

[Ibo24]

I inject the CAFD,
It gives allot of errors though no coding does work.

What is the right display resolution of the 10.25 screen?

[shawnsheridan]

Originally Posted by Ibo24

I inject the CAFD,
It gives allot of errors though no coding does work.

What is the right display resolution of the 10.25 screen?

FA must be propper.

CID_RESOLUTION -> 1280 x 480

[Ibo24]

I have injected the cafd, edited the cafd.

I selected the following:

Apix_mode: apix1
Color_depth: 24
Display resolution: 1280_480
Display size: 10_25
Com mode: mii

I got: no signal
On screen

[shawnsheridan]

Originally Posted by Ibo24

I have injected the cafd, edited the cafd.

I selected the following:

Apix_mode: apix1
Color_depth: 24
Display resolution: 1280_480
Display size: 10_25
Com mode: mii

I got: no signal
On screen

APIX1:

CID_APIX_MODE -> apix1
CID_COLOR_DEPTH -> 18
CID_COM_MODE -> spi

APIX2:

CID_APIX_MODE -> apix2
CID_COLOR_DEPTH -> 24
CID_COM_MODE -> mii

Try both ways.

[Ibo24]

With apix1 settings
No signal

With apix2 settings
No “no signal” on screen, black screen is on

[shawnsheridan]

Originally Posted by Ibo24

With apix1 settings
No signal

With apix2 settings
No “no signal” on screen, black screen is on

If you have NO SIGNAL issue - this means apix1/2 or Comunication MMI/SPI is not set correctly.

IF you have BLANK SCREEN issue - this means that your resolution or size is not set correctly.