[PowerF30]

Hi, one of my headlight modules were damaged recently and I replaced it with a new one. I reset the FEM with ESYS and the headlight turned on. Thought everything was good until I realized that I got a error “Adaptive Headlight Malfunction” and “Headlamp vertical aim control Malfunction”. Halos we’re on but the adaptive feature wasn’t. I read online that Initialization is needed. So I downloaded Ista, set it up via ethernet and tried to initialize. It says initialization successful the second i click initialize but i still have the error. So I tried initializing with a AUTEL device and im getting the same problem. It initialzes successfully instantly but it doesn’t really go through any initializing steps. I am so lost and am fairly new to programming/coding and have been stumped for the past couple of days. I’ve searched loads of forums for a fix but can’t figure it out. If anyone knows the solution to this or if I’m doing something wrong please let me know. Willing to tip $ if someone is able to resolve this problem. Been a huge headache. Thank you!

[PowerF30]

If anyone is wondering I am getting error codes 8041B6 (LWR Faulty) , 8041BA (AHL system Faulty) and 8041FO (Right headlight driver module (TMS): Coding error)

i don’t know if the unexpected LIN slave has anything to do with it but let me know

[TheNine90]

Did you code the new TMS module?

[PowerF30]

Originally Posted by TheNine90

Did you code the new TMS module?

I used ESYS and I just coded the FEM. I couldn't seem to find the TMS module.

[PowerF30]

Does anyone think it’s not initializing because i’m using enet connection instead of ICOM?

[TheNine90]

It doesnt matter what cable you are using. You replaced the module only? Was it the right or left?

[PowerF30]

Originally Posted by TheNine90

It doesnt matter what cable you are using. You replaced the module only? Was it the right or left?

I only replaced the left module

[TheNine90]

PM me I can try to help over teamviewer.