F30POST
F30POST
2012-2015 BMW 3-Series and 4-Series Forum
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read
BMW 3-Series and 4-Series Forum (F30 / F32) | F30POST > Technical Forums > F30 DIYs and Coding Discussions > Enable rear camera and keep it on at all speeds
Studio RSR
Post Reply
 
Thread Tools Search this Thread
      07-17-2018, 12:46 AM   #45
John H.
Lieutenant
John H.'s Avatar
United_States
221
Rep
442
Posts

Drives: 2014 535i XDrive
Join Date: Jun 2017
Location: The O.C.

iTrader: (5)

Quote:
Originally Posted by Almaretto View Post
Using E-sys, I found in PMA and REM.
Copy that.

I have been in contact with the BC developer, Stephan. A few minutes ago, as per his request, I sent him my logs. He seems like a nice guy.

My rear camera does not continually stay on, does not last more that 18 seconds. I can turn it on at any speed. Will keep you guys posted.

https://vimeo.com/280381711


Last edited by John H.; 07-17-2018 at 10:32 AM.. Reason: Added video.
Appreciate 0
      07-17-2018, 07:15 AM   #46
Billfitz
Lieutenant General
Billfitz's Avatar
United_States
8170
Rep
15,962
Posts

Drives: '15 328iX GT
Join Date: Jan 2015
Location: New Hampshire

iTrader: (0)

Quote:
Originally Posted by John H. View Post
My rear camera does not continually stay on, does not last more that 18 seconds.
Refer to post #22.
Appreciate 0
      07-17-2018, 10:12 AM   #47
John H.
Lieutenant
John H.'s Avatar
United_States
221
Rep
442
Posts

Drives: 2014 535i XDrive
Join Date: Jun 2017
Location: The O.C.

iTrader: (5)

Quote:
Originally Posted by Billfitz View Post
Refer to post #22.
Copy. Thanks. In a few min., I will change it.

UPDATE: Bill, that is a no go. According to Stephan, I have no REM on my F10. I'll need to research this more.

Last edited by John H.; 07-20-2018 at 11:28 AM.. Reason: Added info.
Appreciate 0
      07-22-2018, 11:45 PM   #48
Almaretto
Major General
Almaretto's Avatar
2373
Rep
8,364
Posts

Drives: Test Vehicles
Join Date: Dec 2015
Location: Mountain View, CA

iTrader: (0)

Quote:
Originally Posted by John H. View Post
Copy. Thanks. In a few min., I will change it.

UPDATE: Bill, that is a no go. According to Stephan, I have no REM on my F10. I'll need to research this more.
FEM/REM is in F20/F3x/F8x vehicles

F10 will have TRSVC, PDC, & possibly PMA.
Appreciate 0
      07-23-2018, 07:52 AM   #49
Billfitz
Lieutenant General
Billfitz's Avatar
United_States
8170
Rep
15,962
Posts

Drives: '15 328iX GT
Join Date: Jan 2015
Location: New Hampshire

iTrader: (0)

Quote:
Originally Posted by John H. View Post
According to Stephan, I have no REM on my F10.
So why are you in the F30 forum?

When I was researching how to do this the references to the camera were with respect to TRSVC, which was a problem, as the specific items didn't show up in my F20/F30 CAFD. I eventually surmised that since the rear camera and PDC were both operated through the REM and since what affected the one also affected the other that a change to the PDC would also work with the camera. What works with F10 I can't say, but it's a safe bet that something will, you just have to figure it out, as it's not referenced on the cheat sheets or coding database. Looking at all the options in CAFD I doubt that even 10% of them have been investigated to see what they all do.
Appreciate 0
      07-23-2018, 03:49 PM   #50
John H.
Lieutenant
John H.'s Avatar
United_States
221
Rep
442
Posts

Drives: 2014 535i XDrive
Join Date: Jun 2017
Location: The O.C.

iTrader: (5)

Quote:
Originally Posted by Billfitz View Post
So why are you in the F30 forum? .
Jason sent me here...

https://f10.5post.com/forums/showthread.php?t=809016



Below are the ECUs shown by bimmercode app....


Last edited by John H.; 07-23-2018 at 05:36 PM.. Reason: Added info.
Appreciate 0
      07-25-2018, 09:15 PM   #51
Almaretto
Major General
Almaretto's Avatar
2373
Rep
8,364
Posts

Drives: Test Vehicles
Join Date: Dec 2015
Location: Mountain View, CA

iTrader: (0)

Quote:
Originally Posted by John H. View Post
Jason sent me here...

https://f10.5post.com/forums/showthread.php?t=809016



Below are the ECUs shown by bimmercode app....
Check out comment #48. Your settings are in PDC and TRSVC.
Appreciate 0
      07-27-2018, 10:13 AM   #52
John H.
Lieutenant
John H.'s Avatar
United_States
221
Rep
442
Posts

Drives: 2014 535i XDrive
Join Date: Jun 2017
Location: The O.C.

iTrader: (5)

Quote:
Originally Posted by Almaretto View Post
Check out comment #48. Your settings are in PDC and TRSVC.
Thanks. I have the day off. Will take a look.

Spoke with another F10 Member, he is also unable to keep it from shutting down at approx. 250m.

Developer Stephan suggested looking at PDC values. Not certain if he even knows how to keep it on, or, he is not telling me how. Today, bimmercode had an update.

Thanks again.
Appreciate 0
      07-27-2018, 11:59 AM   #53
Almaretto
Major General
Almaretto's Avatar
2373
Rep
8,364
Posts

Drives: Test Vehicles
Join Date: Dec 2015
Location: Mountain View, CA

iTrader: (0)

Quote:
Originally Posted by John H. View Post
Thanks. I have the day off. Will take a look.

Spoke with another F10 Member, he is also unable to keep it from shutting down at approx. 250m.

Developer Stephan suggested looking at PDC values. Not certain if he even knows how to keep it on, or, he is not telling me how. Today, bimmercode had an update.

Thanks again.
Appreciate 0
      07-27-2018, 01:32 PM   #54
marcospoffo
Private
marcospoffo's Avatar
Brazil
17
Rep
98
Posts

Drives: 320 F30 - 2013
Join Date: Mar 2015
Location: Brazil - SC

iTrader: (0)

You could try this function. Will open an option on the camera

HU_NBT 3001 MACRO_TRAILER_COUPLING nicht_aktiv to aktiv


Quote:
Originally Posted by hardparker View Post
I use it to monitor the hitch and load on my trailer on my X3.
__________________
320 F30 2013.
Appreciate 1
John H.221.00
      07-27-2018, 11:27 PM   #55
John H.
Lieutenant
John H.'s Avatar
United_States
221
Rep
442
Posts

Drives: 2014 535i XDrive
Join Date: Jun 2017
Location: The O.C.

iTrader: (5)

Quote:
Originally Posted by marcospoffo View Post
You could try this function. Will open an option on the camera

HU_NBT 3001 MACRO_TRAILER_COUPLING nicht_aktiv to aktiv
Thank you for the suggestion. I will look into it. Obrigado! Valeu!
Appreciate 0
      07-29-2018, 04:22 PM   #56
Billfitz
Lieutenant General
Billfitz's Avatar
United_States
8170
Rep
15,962
Posts

Drives: '15 328iX GT
Join Date: Jan 2015
Location: New Hampshire

iTrader: (0)

Quote:
Originally Posted by John H. View Post
Spoke with another F10 Member, he is also unable to keep it from shutting down at approx. 250m.
That's what mine did, which I fixed by changing FF to 00 in the REM 3203 PdcParkMasterVar D_SCHWELLE_ 1 . If you don't have that option somewhere you've got an entry 'distance when it auto disables rear camera view when in forward D_SCHWELLE_1 wert '. I found that changing the wert value only changed the distance, with a maximum of 255m. It was only by changing FF to 00 that it eliminated any distance value.
Appreciate 1
John H.221.00
      03-01-2019, 10:25 PM   #57
John H.
Lieutenant
John H.'s Avatar
United_States
221
Rep
442
Posts

Drives: 2014 535i XDrive
Join Date: Jun 2017
Location: The O.C.

iTrader: (5)

Quote:
Originally Posted by Billfitz View Post
That's what mine did, which I fixed by changing FF to 00 in the REM 3203 PdcParkMasterVar D_SCHWELLE_ 1 . If you don't have that option somewhere you've got an entry 'distance when it auto disables rear camera view when in forward D_SCHWELLE_1 wert '. I found that changing the wert value only changed the distance, with a maximum of 255m. It was only by changing FF to 00 that it eliminated any distance value.
Hi Bill. Sorry for the late, late delay in response. Got sidetracked on other projects. I certainly appreciate the advice, and will make the changes in value. Will keep everyone posted. Thanks again!
Appreciate 0
      03-02-2019, 08:05 AM   #58
Billfitz
Lieutenant General
Billfitz's Avatar
United_States
8170
Rep
15,962
Posts

Drives: '15 328iX GT
Join Date: Jan 2015
Location: New Hampshire

iTrader: (0)

Something I'd really like to do is to change the zoom, so that objects appear a lot closer, like maybe half the distance as they do. I did the macro trailer to see what it looks like, and it's OK for that, but not general viewing. It seems to me that if you can switch from the standard view to the extreme zoom of macro trailer that there could be a zoom percentage werte in some CAFD waiting for someone to discover it.
Appreciate 0
      10-16-2019, 11:35 PM   #59
d0ctorj3kyll
New Member
Australia
7
Rep
19
Posts

Drives: 2019 F82 M4 Comp
Join Date: Jul 2017
Location: Melbourne, Australia

iTrader: (0)

Hi all

Been reading the thread but I'm a coding newbie and don't want to go messing things up! Hoping for some clarification

I'd like to be able to activate all my cameras (reverse, top view and side view) at any speed of driving but also have them all automatically deactivate after a certain distance travelled. I.e. make activation independent of speed and only reliant on distance. That way I can turn on side or top view on a highway to check something if necessary but have it turn off by itself a few moments later after travelling a short distance.

What sections do I need to modify for those settings and to what?

I've set the PDC CUT_OFF_SPEED to FF and both V_SCHWELLE values to wert_03/FF as directed by the PDF guide on page one of this thread, and left the distance values for PDC and RVC deactivation as default/wert_02. Does that sound about right?

If it makes any difference I'd like to keep the RVC automatically coming on when I select reverse.

Thanks for your help!
Appreciate 0
      01-27-2020, 02:23 PM   #60
TexasBruiser
New Member
3
Rep
21
Posts

Drives: BMW 750i xDrive
Join Date: Jun 2019
Location: Texas

iTrader: (0)

Please back-up with the complete info - no pun intended!

I do understand that the vehicle has to have some coding done - but where is this coding hardware & software? I have a 2016 750i xDrive. Because of many factors, including the rear sunshade...water on the rear glass...etc, my inside rear facing dashcam only captures 50% of hte action.

So, when I came across your coding, I can solve my problem by having an inside
cam facing the back-up screen :-)

But what do I need? I've looked everywhere and can't find the details of what to buy and where.

That's why I asked if you could back up and cover what's needed to get started and where the "code book" is.

Thanks!
Appreciate 0
      01-27-2020, 02:38 PM   #61
Steveo
Captain
Steveo's Avatar
147
Rep
701
Posts

Drives: M4
Join Date: May 2009
Location: Earth

iTrader: (0)

I’m looking to switch the PDC and camera off straight away after switching from reverse into Drive,
It’s currently staying on for a while after driving forward, what do I need to change to enable this?
Appreciate 0
      01-27-2020, 04:10 PM   #62
Billfitz
Lieutenant General
Billfitz's Avatar
United_States
8170
Rep
15,962
Posts

Drives: '15 328iX GT
Join Date: Jan 2015
Location: New Hampshire

iTrader: (0)

AFAIK the only things you can change are the speed and distance before it shuts off.
Appreciate 0
      12-05-2020, 07:01 PM   #63
imkrris
Registered
0
Rep
4
Posts

Drives: Bmw m850i convertible
Join Date: Jan 2020
Location: Croatia

iTrader: (0)

Quote:
Originally Posted by F36420I View Post
Hello

I finally found the way to enable and keep on the rear camera at all speeds
Does anyone know if its the same thing on g series?
Appreciate 0
      12-10-2020, 12:43 AM   #64
Almaretto
Major General
Almaretto's Avatar
2373
Rep
8,364
Posts

Drives: Test Vehicles
Join Date: Dec 2015
Location: Mountain View, CA

iTrader: (0)

Quote:
Originally Posted by imkrris View Post
Does anyone know if its the same thing on g series?
Coding in ACSM and CAM module.
Appreciate 0
      11-13-2022, 02:50 PM   #65
Cognac340
New Member
8
Rep
17
Posts

Drives: 2018 Bmw 340i xdrive
Join Date: May 2022
Location: Los Angeles

iTrader: (0)

Quote:
Originally Posted by F36420I View Post
Hello yes I confirm it stays always on

You must chose wert _03 for both

REM 3000 The distance when it auto disables rear camera view when in forward D_SCHWELLE_1 wert _03

REM 3000 The distance when it auto disables rear camera view when reverse is engaged D_SCHWELLE_2 wert _03

This will set the werte=00

If it doesn't work also change

REM 3201 Max speed when visible and audible warning is given with PDC km/h in hexa CUT_OFF_SPEED werte = FF
I have a 2018 340 and this did not work for me it only left my top view cameras on at any speed also there was no Trsvc 3000 option for me in any of my modules
Appreciate 0
      03-05-2024, 04:21 AM   #66
sanchez20
Registered
Romania
0
Rep
4
Posts

Drives: bmw f26
Join Date: Jan 2024
Location: iasi

iTrader: (0)

can't this coding be done with BimmerCode as well?
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 04:09 AM.




f30post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST