[Crosshairsuk]

Hi sorry I know this has been asked before probably countless times.
Can anyone help with the fuse and fuse location for the horn on my 320d F31 (Year 2017).
Needed urgently as its stopper honking.... :-/

[ian332isport]

Horn failure is very common on the Fx series cars. You probably need a pair of new horns.

[Crosshairsuk]

Thanks, but before I do that, I want to check the fuse first. But can't determine where it is

[Labradoodleb]

It used to be in the fuse panel under the glove box but bmw removed it for lci cars (not sure on exact date).. From experience it's actually easier to change the horn than access the fuses and find there isn't one!

[ian332isport]

Originally Posted by Crosshairsuk

Thanks, but before I do that, I want to check the fuse first. But can't determine where it is

It looks like it's fuse F14 on the front of the FEM module. I believe the FEM module is fixed to the left side of the car just left of the glovebox.

You can probably access it by dropping the panel below the glovebox, but may need to remove the glovebox completely.

It may be easier to see if you get 12v at the horn when you press the horn button. If you get 12v, the fuse is fine and the horn(s) is/are dead.

[Crosshairsuk]

Originally Posted by ian332isport

It looks like it's fuse F14 on the front of the FEM module. I believe the FEM module is fixed to the left side of the car just left of the glovebox.

You can probably access it by dropping the panel below the glovebox, but may need to remove the glovebox completely.

It may be easier to see if you get 12v at the horn when you press the horn button. If you get 12v, the fuse is fine and the horn(s) is/are dead.

I'll give that a go, thanks pal