NBT EVO 6WA Units not getting saved

aceofbase · 06-04-2018, 01:55 AM

I installed an NBT EVO HU (ECE) and a 6WA cluster to a US based 2012 328I. The units under IDrive are metric (E.g. KM, dd/mm/yyyy, 24 hr time etc) . While I can change this using iDrive settings , the units are not getting saved. They revert back to KM, 24 hr time etc. after I shut down the car and I have to change them again each time I start the car for navigation to show miles . Any ideas on what could be wrong?

aceofbase · 06-04-2018, 09:39 PM

This worked for me after I changed EINHEITEN_MASTER to Kombi_l6 . It was HMI previously. Now everything shows correct units for the US

06-04-2018, 01:55 AM	#1
aceofbase New Member 0 Rep 5 Posts Drives: BMW 2012 328I Join Date: May 2018 Location: Seattle, WA iTrader: (0)	NBT EVO 6WA Units not getting saved I installed an NBT EVO HU (ECE) and a 6WA cluster to a US based 2012 328I. The units under IDrive are metric (E.g. KM, dd/mm/yyyy, 24 hr time etc) . While I can change this using iDrive settings , the units are not getting saved. They revert back to KM, 24 hr time etc. after I shut down the car and I have to change them again each time I start the car for navigation to show miles . Any ideas on what could be wrong?
	Appreciate 0 Tweet Quote

06-04-2018, 09:39 PM	#2
aceofbase New Member 0 Rep 5 Posts Drives: BMW 2012 328I Join Date: May 2018 Location: Seattle, WA iTrader: (0)	This worked for me after I changed EINHEITEN_MASTER to Kombi_l6 . It was HMI previously. Now everything shows correct units for the US
	Appreciate 0 Quote