10-06-2021, 09:01 AM | #1 |
Registered
0
Rep 2
Posts |
F36 parts for the f32
hello,
i am planning to import my 201f32 bmw 435i m package to Egypt where i live right now; however, in egypt there are no f32 parts as the only 4 series that the dealer import is the f36 418i. so im asking if the f36 body parts (front bumper, rear bumper, bonnet, tail lights, headlights, etc...) will fit the f32 or not. and would the f33 have the same fitmets or not. |
10-06-2021, 10:09 AM | #2 |
Private First Class
103
Rep 193
Posts |
Go to realoem.com, punch in the last 7 of your VIN and it will bring up all the parts used in your car, broken down into groups. If you click on a part number, it will tell you all the vehicles that uses that exact part. That's probably going to be the best way to check. You could also have a dealer's parts department help you out.
In short though, all F3X chassis share a lot of parts, but it's not 100%. For the F32 and F36, where the main differences are in the rear half of the car, it's more likely parts used up front (bonnet, headlamps, front bumper etc.) are going to be interchangeable than parts used in the rear |
Post Reply |
Bookmarks |
|
|