[lebaaron]

Hi

do you have any feedback regarding this catted downpipe
https://www.vividracing.com/-p-151857214.html

Do is it trigger a CEL if no tune, also the link is for an M2 that apparently would fit our N55 pwg regarding my setup.

https://shop.bmw.ca/p/BMW_2018_M2-Co...328602882.html

thx

[435gc]

Since it is catless you will get a cel if you don't have a tune to hide it.

Edit: I now see it has a 400cel cat. You would be rolling the dice, but might be ok.

[thejeremyman9]

Did you do a google search? I have only seen one other person on here post about it: https://f30.bimmerpost.com/forums/sh....php?t=1664153

Not sure about fitment on PWG... I don't think any M2 were PWG?

[lebaaron]

Originally Posted by thejeremyman9

Did you do a google search? I have only seen one other person on here post about it: https://f30.bimmerpost.com/forums/sh....php?t=1664153

Not sure about fitment on PWG... I don't think any M2 were PWG?

yes I googled it but it's got confused since someone wanted to traded to me saying that it would certainly fit, since I'm not an expert it created confusion. So thanks for enlightening me

[lebaaron]

Originally Posted by 435gc

Since it is catless you will get a cel if you don't have a tune to hide it.

Edit: I now see it has a 400cel cat. You would be rolling the dice, but might be ok.

Do you mean it would fit our N55 pwg?... I agree that I could email the seller as well 😬

[435gc]

Originally Posted by lebaaron

Do you mean it would fit our N55 pwg?... I agree that our could email the seller as well 😬

No I mean the cel.

Ewg dp will not fit a pwg turbo.

[lebaaron]

Originally Posted by 435gc

No I mean the cel.

Ewg dp will not fit a pwg turbo.

ok, and yes I'm aware ewg wouldn't fit pwg.

[thejeremyman9]

Originally Posted by lebaaron

Do you mean it would fit our N55 pwg?... I agree that I could email the seller as well 😬

You need to contact the seller and have them confirm they had it on their PWG, or if they themselves are unsure, measure the DP at the turbo side and it should be 3.5'' for PWG (EWG is 4'').

[lebaaron]

Originally Posted by thejeremyman9

You need to contact the seller and have them confirm they had it on their PWG, or if they themselves are unsure, measure the DP at the turbo side and it should be 3.5'' for PWG (EWG is 4'').

I'll do that thx