[scanepa]

Originally Posted by John in VA

If you don't like the "egg yolk" look, lightly coat the bulb with several coats of silver spray paint. I took a piece of cardboard, cut 2 Xs in it to hold the bulbs up straight, and sprayed 2 light coats. The bulbs still blink amber, but are difficult to see through the lenses when off. This may seem cheesy, but it worked for me!

Picture?

[Andlee]

https://bimmian.com/Accessories-for-...-Signal-Bulbs/

Will these work?

[JTEsquire]

No. 4 Series requires a PY24W bulb.

http://www.bulbtown.com/5200S_PSY24W...se_p/5200s.htm

This seems to be the best option you can find. However, this bulb seems only partially silver and is still amber in color. I'm looking for a completely clear, white bulb. I don't think it exists.

[Vegetable]

Originally Posted by Andlee

https://bimmian.com/Accessories-for-...-Signal-Bulbs/

Will these work?

For some reason that company doesn't make them for our cars.

[John in VA]

Originally Posted by scanepa

Picture?

No time to remove it from the lamp. I had some Eastwood Cad Silver nearby so used that. Not glossy on the outside, but pretty much invisible. You can use a Krylon or DupliColor Silver, too.