[FernandoR]

Oguz Kuruca,

What size tires are those?

Thank you

[714f30]

Bit off topic but I need some help: I found these HREs I really like but not sure about fitment. 20x9 et25 and 20x10 et40, would prob run 235/35 and 265/30 respectively. Seems close in size and offset to 437m wheels. Anyone know if these would fit?? What would be the diff in fitment with these and 437m?

[TurboLove]

Originally Posted by oguz kuruca

[SIZE="5"]Here is the car with 720lbs in the back..there is about half a finger gap between the tire and the fender.. i tied to bounce the back and still did not rub.. looks like I'm keeping this setup [/SIZE]

😂😂😂 I love this great test bro you are a legend

[714f30]

Just had my set put on. MPSS 245/35 and 265/35. Lowered on kw v1. There's a half/1 finger gap in the front, and no gap/slight tuck in the rear. She looks amazing but there is slight rubbing. Coilovers were installed yday so I'll prob adjust a lil bit and get an alignment to fix. I love the new look...now I need the m sport bumper

[oranga]

Has anyone been able to get a square setup of these, or the 513M wheels, with just the front wheels? In other words, all four wheels in 9 inch width?

It seems easy enough to get a staggered setup in the classifieds, but I'm not down with the amount of poke with the 10 inch rear wheels. Has anyone been able to buy two full sets, and then successfully sell off all the rears? I just don't know how much demand there would be for rear wheels only.

And I realize I could order them from BMW, but I'm looking for a more cost-effective solution.

[Avodka14]

245/35 front
265/35 rear

HR Sport Springs

[R99]

Originally Posted by oranga

Has anyone been able to get a square setup of these, or the 513M wheels, with just the front wheels? In other words, all four wheels in 9 inch width?

It seems easy enough to get a staggered setup in the classifieds, but I'm not down with the amount of poke with the 10 inch rear wheels. Has anyone been able to buy two full sets, and then successfully sell off all the rears? I just don't know how much demand there would be for rear wheels only.

And I realize I could order them from BMW, but I'm looking for a more cost-effective solution.

The fronts poke more than the rears

[Elliot]

Originally Posted by TurboLove

😂😂😂 I love this great test bro you are a legend

It was a pretty epic test, especially with the dudes flipping him the bird as he took photos.
I'm kinda wondering if he might have exceeded the gross vehicle weight limit for his rear axle...

[obert]

Originally Posted by 714f30

Just had my set put on. MPSS 245/35 and 265/35. Lowered on kw v1. There's a half/1 finger gap in the front, and no gap/slight tuck in the rear. She looks amazing but there is slight rubbing. Coilovers were installed yday so I'll prob adjust a lil bit and get an alignment to fix. I love the new look...now I need the m sport bumper

Doing this exact set up. Just waiting on tires to get here.

[714f30]

Originally Posted by obert

Doing this exact set up. Just waiting on tires to get here.

I'm thinking about switching to 235/35 or even 234/40 in the front. I like the current ride height but it does rub on bigger dips on the freeway. I'm thinking the 235 tire won't run, or won't run as much. Here's how she's sitting right now

[obert]

Yeah my car is lowered on BC coils so I am hoping for the best

[scoopy]

Originally Posted by Avodka14

245/35 front
265/35 rear

HR Sport Springs

Any rubbing issues with this setup?

[R99]

No issues, I run 245/35 & 265/35 on H&R sport without a problem!

[Crazy_1201]

Hello. Replica 18’’ 437M alloys 8j and 8.5j staggered setup with et35 and et38
Would they fit an f30?
What would be the best tyre size?
225/45/18 and 255/40/18?

[Avodka14]

Originally Posted by scoopy

Any rubbing issues with this setup?

Not at all. It's a perfect fit.

[TheShadow]

My car, lowered on eibach pro springs

[Miami305]

What would be the best 437m wheels tire size for a 435i coupe??? Stock height.
After reading hundreds of comments I am still looking for an answer. I'm confused.
If you could please help me with that info I will really appreciate it! Thanks.

[RMachuca3d]

Originally Posted by Miami305

What would be the best 437m wheels tire size for a 435i coupe??? Stock height.
After reading hundreds of comments I am still looking for an answer. I'm confused.
If you could please help me with that info I will really appreciate it! Thanks.

If its anything like the F30, with stock suspension the fronts will poke out about 1". I have 245\35 fronts and 265\35 rears and the tires fit great with no rubs, just need to lower the car before I leave them permanently on.

[R99]

Originally Posted by TheShadow

My car, lowered on eibach pro springs

What lip is that?

Looks great

[NCG80M3]

Thanks to this Thread, I pulled the trigger

255/35/19 Front
275/35/19 Rear

Firestone Firehawk Indy 500 tires

No rubbing. I would go with 245/40/19 in the front next time. Otherwise they are perfect.

[Miami305]

I want to go with the 275/30 r19 rear, but I haven't found any run flat on this size.
Are yours run flat?
Do I need to sacrifice the run flats and get a spare tire? I really love the width & aggressive look on the 275/30-19 setup.
What do you think?

[oregondonor]

Originally Posted by NCZHP

Thanks to this Thread, I pulled the trigger

255/35/19 Front
275/35/19 Rear

Firestone Firehawk Indy 500 tires

No rubbing. I would go with 245/40/19 in the front next time. Otherwise they are perfect.

Are you sitting on stock suspension? I have #85 and looking for this exact combo. From the pic these look gloss black? Where did you get these? I would rather go with a solid color besides the machined version.

How many colors do the 437m come in?