06-23-2015, 05:12 PM | #1 |
Captain
170
Rep 955
Posts |
M3 Lower Control Arm for F30
Like new F8x M3/M4 lower control arms. These are longer than the stock arms for a bolt-in negative camber increase of 1.0 degree. With camber being so important to handling improvements these are a must-have upgrade. They are a direct bolt-in replacement for the stock F22/F3X wishbones.You will experience increased turn in feel, maximum corner grip and reduced tire wear. $300 shipped Last edited by djpeetur; 02-02-2017 at 04:53 PM.. |
06-24-2015, 06:41 AM | #2 | |
Car OCD
263
Rep 595
Posts
Drives: 2017 EBII F36 430d M Sport
Join Date: Oct 2014
Location: Belgium, USA... behind the wheel
|
Quote:
Also, Do you have the Xenon lights leveling kit that should be used for the F3x when installing F8x control arms? Thanks a lot!
__________________
2017 BMW F36 430D M Sport Estoril Blue, 2002 E46 M3 Imola Red & 2006 Porsche Cayman S Artic Silver
More about my ride @ ATLBlue's 2014 F30 Journal. Instagram Inline6_ATL |
|
Appreciate
0
|
06-26-2015, 04:48 AM | #3 |
Captain
170
Rep 955
Posts |
No picture. Made my car stiffer. I put sway bar on. So I took off the arms. The level kit is just a screw that pops into the stock level rod and screws into the m3 arm. The level kit is just is thread one end and a ball on the end. I just didn't like the camber the way it look. I can now use spacer.
|
Appreciate
0
|
08-02-2017, 06:36 PM | #14 |
Brigadier General
734
Rep 4,635
Posts |
ill take these. Please pm best price
__________________
Follow my BMW instagram @CARMODIFICATION Let me know you are from bimmerpost and i'll follow back
|
Appreciate
0
|
08-17-2017, 11:15 AM | #15 |
Captain
518
Rep 891
Posts |
Are these still available?
__________________
328i RWD | MW on CRed Slick Top | 6MT | BM3 | MPE | GPlus FMIC | CSF Radiator | Millway Street Camber Plates & Monoballs | KW V2 6k/18k Swift Springs | F80 LCA/TS | SPL Bump Steer Kit | APEX SM-10 | R-S4 | DS2500 | RBF600 | SS Lines | Past: E36 328is & E38 740i |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|