[av.cr2]

hello guys I'm thinking of buying some wheels second hand for a really good price but I fear the fitment is too aggressive the fronts are 19x9.5 +22 and the tears are 19x10.5 +22. My question is, if I buy them am I going to need camber arms to make them fit or do the stock ones have enough adjustment in them?

[alohasurftoad]

way too aggressive. the rim and tire poke will look ridiculous, front tires will rub the fenderwell liner while turning and both fender lips will rub the tires at full suspension compression.

depending on lowering, negative camber and tire size...generally, the max rim widths, offsets are 9.5" +35 front, 10.5" +45 rear. i've seen tire widths of 265 up front and 295 in the rear (with appropriate aspect ratios fit) and it's probably the limit without additional negative camber.

if you have stretched tires and add additional negative camber, the front may fit but i believe the rears still won't fit. i am not informed nor a fan of slammed/stanced/stretched set ups, so i am not sure. you'll have to check that thread below.