12-12-2021, 02:43 PM | #1 |
Private First Class
16
Rep 108
Posts |
CEL s0751 -help
I got a CEL and pulled a S0751 code from ISTA+.
Any clue? This fault memory entry is displayed if at least one permanent SAE fault code is saved in an emission relevant control unit. Condition for fault identification Terminal 15 on or PWF statuses: Driving, PAD Condition for fault memory entry The fault is entered during the brief test |
01-21-2022, 05:25 PM | #2 |
New Member
5
Rep 11
Posts |
Did you find out what this was? I have the same code showing, description suggestions an emissions related issue.
I also had one about the Mass Air Flow Sensor and am guessing they are related. |
Appreciate
0
|
01-22-2022, 08:30 AM | #3 |
New Member
5
Rep 11
Posts |
never mind, found your other post on this: https://f15.bimmerpost.com/forums///....php?t=1882749
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|