[wdeerfield]

Originally Posted by PabloK

Lol wrong car - my bad

That looks great. Perfect fitment and finish on them. I almost went with those but didn't want to clean them.

[VMRWheels]

Originally Posted by PabloK

Lol wrong car - my bad

That's more like it! Not an F30 but we'll take it!

[Kefka]

hey VMR people, any ETA about re-stocking V705/706 gunmetal? (19" staggered)

[Mkswoosh]

19's on a drive f30 with coilovers

9.5 et 40 can i fit 275/35 in the rears without rubbing? I'm at -1.2 camber back there.

[eddiehatchblack]

V710s in gunmetal with Hankook Ventus V12 Evo2
19x8.5 et35 - 245/35-19
19x9.5 et45 - 275/30-19
Lowered on KW V1s

Next set of tires I'm going with 245/40-19 and 275/35-19 Michelin PS4s and raising the car a bit over 1/2 an inch.

[VMRWheels]

Originally Posted by eddiehatchblack

V710s in gunmetal with Hankook Ventus V12 Evo2
19x8.5 et35 - 245/35-19
19x9.5 et45 - 275/30-19
Lowered on KW V1s

Next set of tires I'm going with 245/40-19 and 275/35-19 Michelin PS4s and raising the car a bit over 1/2 an inch.

Thanks for sharing! Huge wagon fan!

[Gen13 F36]

finally I got my wheels and can post here.

VMR v804 Gunmetal
19x8.5 +35 wrap with 245/35r19 indy 500
19x9.5 +45 wrap with 265/35r19 indy 500
stock m-sport suspension

Still debating lowering it.

[rudyr89]

VMR V810

19" x 8.5" +35mm offset
19" x 9.5" +40mm offset

I'll be working on the suspension next.

[It's Oz]

I had originally purchased a set of V710's in gunmetal from VMR. I quickly realized mounting them, that the wrong bolt pattern had be machined on the front wheels (I was informed that this does not happen very often last time being back in 2016). Long story short, with no more V710's in stock, VMR was kind enough to allow me to pick a different wheel in stock at a discounted rate. I went with the V801's in hyper silver and boy does it look great. I honestly like the look of the V801 on the F30 better than the V710 because of the sharp lines. The hyper silver really contrasts with the blue vs the gunmetal, as well. Shoutout to Justin at VMR for being awesome and making sure I was taken care of and in a timely manner. I am a happy customer!

Wheel and tire specs:
Front - 19x8.5" ET35 245/35/19
Rear - 19x9.5" ET45 275/30/19

For those of you wondering what tires to throw on a wheel with those specs, I would recommend 10/10 to go with the 245 and 275 set up respectively. You will be happy you have a meatier tire. It fills the wheel well better and gives for an aggressive look from the rear; and the best part, NO RUBBING.

Feel free to private message me if you would like pictures closer up to see fitment, tire height/stretch, etc.

[tpo209]

Originally Posted by girlsdontpoo

Do you know if this is lowered?

What color wheels are these? Gunmetal? Looking for pics of gunmetal on mineral gray before I buy.

[tpo209]

Originally Posted by the dope steez

Mounted my V710s for the summer - classic design!

What color wheels are these? Trying to decide before I buy.

[the dope steez]

Originally Posted by tpo209

What color wheels are these? Trying to decide before I buy.

They are hyper silver

[Skoooch]

[QUOTE=Cstyles;15859702]I just installed the new VMR V810 flow-forged series, and my expectations are beyond exceeded!

I was originally looking at Forgestar but when VMR released their own flow-forged wheel, the CSL-esque design told me instantly this was the wheel I needed! Allen @ Simply Tire in Toronto hooked me up with pricing that was equal to buying out of the USA, so shopping local was a no-brainer. I could not be any happier with the wheel design and fitment, they just look to be about perfect for the F30 body lines. Thought I would start a thread where people can post their VMR setups as well.

2013 335i x-drive with DHP
H&R Sport Springs (for x-drive)
Continental ExtremeContact DW
19x8.5 +35 with 245/35/19
19x9.5 +40 with 275/30/19 (love the new look from the rear with these, very aggressive!)
Absolutely positively no rubbing at all with the H&R sport springs. This is the perfect fitment for anyone looking to go wide without worrying about rubbing.

You have x-drive and the difference in diameter of the front and the rear tire is 1.2% (recommendation for x-drive is to keep the difference as low as possible, in general below 1%). I'm curious how the car is reading that for you? i'm looking to get the same set-up but I'm worried about the 1.2% variance.

[RDY4TKF]

I just got back from installing my VMR V804. They were about 10 pounds lighter than the OEM wheels. I can already feel a difference in acceleration.

[Dimi_M]

Picked these up in November and finally came around to throwing them on!
Bringing this thread back from the dead!
(Drop is H&R Sports)

V804
19x8.5 et35
19x9.5 et45

Tires:
Continental ExtremeContact DWS 06Plus
235/40R19
265/35R19

VMR Weight W/ Tires
F:45.2lbs
R:47.2lbbs

OEM 403m Weight W/Tires
F: 52.5lbs
R: 53.8lbs

[captainfast]

Originally Posted by Dimi_M

Picked these up in November and finally came around to throwing them on!
Bringing this thread back from the dead!
(Drop is H&R Sports)

V804
19x8.5 et35
19x9.5 et45

Tires:
Continental ExtremeContact DWS 06Plus
235/40R19
265/35R19

VMR Weight W/ Tires
F:45.2lbs
R:47.2lbbs

OEM 403m Weight W/Tires
F: 52.5lbs
R: 53.8lbs

Nice wheels dude. Where did you get those tail lights from Looks sick!

[cfm56d7b]

Originally Posted by eddiehatchblack

V710s in gunmetal with Hankook Ventus V12 Evo2
19x8.5 et35 - 245/35-19
19x9.5 et45 - 275/30-19
Lowered on KW V1s

Next set of tires I'm going with 245/40-19 and 275/35-19 Michelin PS4s and raising the car a bit over 1/2 an inch.

Very sharp appearance. Great choice!

[Dimi_M]

Originally Posted by captainfast

Nice wheels dude. Where did you get those tail lights from Looks sick!

Thank you!
Tails can be found on aliexpress or
https://www.kiesmotorsports.com/prod...le-tail-lights

[Sonic440i]

VMR V710 gunmetal

Front: 19 x 8.5 +35 on 225/40/19 Michelin PS4S
Rear: 19 x 9.5 +45 on 255/35/19 Michelin PS4S

Stock M adaptive suspension for xDrive

Now I need my damn Eibach springs to come in already

[culpability]

So I'm absolutely obsessed with the stance of OP's car. I ADORE that big, fat, nasty looking squat.

I'm looking at buying some Enkei RAIJIN-19's from TireRack but am a complete wheel and tire noob. Are the width / offsets of wheels universal? I.E., OPs specs are below:
19x8.5 +35 with 245/35/19
19x9.5 +40 with 275/30/19
If I buy Enkei's with the exact same size and offset, am I going to be able to fit those same tires on there too? Or do different brands / wheels fit a little bit differently? TireRack lets me equip 'em to my car, so I suppose they are guaranteeing they fit, but I just wanna be sure I'm going to have that super wide look if I do pull the trigger.

EDIT: Holy SMOKES, then I saw the car literally right above this and now I NEED some VMR710s. So I've got a 440I GC with M-Sport suspension. Any reason I won't be able to run the above set-up? I've seen some users going with a +45 offset on the rear, as I understand it a higher offset will pull the wheel further into the wheelwell correct? So +40 is more aggressive than +45?

[MoeTE87]

Originally Posted by PabloK

Hooty hoo!

Hello! Can you provide the specs on the wheels and tires please?

[EvenKeel]

Is the v706 discontinued?