[kromix]

I don't see the corner amber marker delete option in the google spreadsheet, it was done earlier in the thread by svache it seems, but no reference to what values to change...

[vkoprivica]

Originally Posted by kon

Yes - IHKA module 3000 OFF_MEMORY, set to aktiv

Originally Posted by vkoprivica
Hi, I am the owner of f30 who is interested to change default hvac behavior. Currently my car remembers last temperature setting but not the on/off state. Every time when I start the engine, hvac turns on even though I left it off last time before I turned the engine off. I was wondering if there is a way to make computer remembers a last hvac on/off setting.

Thank you.

Yes - IHKA module 3000 OFF_MEMORY, set to aktiv


I was at the dealer today to change the setting and was told that it is applicable only to old models. The coder was not able to figure out how to resolve my issues and find proper settings. Does anyone know what setting needs to be changed on f30 models?

[kon]

Originally Posted by vkoprivica

Originally Posted by vkoprivica
Hi, I am the owner of f30 who is interested to change default hvac behavior. Currently my car remembers last temperature setting but not the on/off state. Every time when I start the engine, hvac turns on even though I left it off last time before I turned the engine off. I was wondering if there is a way to make computer remembers a last hvac on/off setting.

Thank you.

Yes - IHKA module 3000 OFF_MEMORY, set to aktiv


I was at the dealer today to change the setting and was told that it is applicable only to old models. The coder was not able to figure out how to resolve my issues and find proper settings. Does anyone know what setting needs to be changed on f30 models?

the dealer generally couldn't change specific settings you asked for - the feature is there in your F30, you need to use esys to manually change the IHKA module.

[kon]

Originally Posted by DXL XLR8

Got it! Thanks you guys! Did my first coding session today and everything went smooth. Only thing was coding the mirrors to close automatically when lock didn't work. Any ideas as to why?

which settings you change to code the mirrors to close automatically? for comfort close, mirror & sunroof will close in sequence, but you need to keep the close/lock button depress (either the keyfob or door handle for comfort access)

[shawnsheridan]

Originally Posted by kromix

I don't see the corner amber marker delete option in the google spreadsheet, it was done earlier in the thread by svache it seems, but no reference to what values to change...

FEM_BODY:

MAPPING_SIDEMARKER_L_OUTPUT = off
MAPPING_SIDEMARKER_R_OUTPUT = off

[DXL XLR8]

Originally Posted by kon

which settings you change to code the mirrors to close automatically? for comfort close, mirror & sunroof will close in sequence, but you need to keep the close/lock button depress (either the keyfob or door handle for comfort access)

I changed "ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN" and "ASP_AUSKLAPPEN_NACH_KOMFORTSCHLIESSEN" to "aktiv (werte = 01). I didn't know what the cheat code meant by needs _FB for keyfob or _PA for door. Also changed "KOMFORTSCHLIESSUNG_FB" to aktiv (werte =01).

[shawnsheridan]

Originally Posted by DXL XLR8

I changed "ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN" and "ASP_AUSKLAPPEN_NACH_KOMFORTSCHLIESSEN" to "aktiv (werte = 01). I didn't know what the cheat code meant by needs _FB for keyfob or _PA for door. Also changed "KOMFORTSCHLIESSUNG_FB" to aktiv (werte =01).

Set all of these to active:

ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN
ASP_AUSKLAPPEN_NACH_KOMFORTSCHLIESSEN
KOMFORTSCHLIESSUNG_FB
KOMFORTSCHLIESSUNG_PA

Change only the Drop-down selection to aktiv, and leave the Werte values alone.

You will need to hold the Fob Button or touch the CA Door Ridges for a couple seconds for it to work.

[DXL XLR8]

Originally Posted by shawnsheridan

Set all of these to active:

ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN
ASP_AUSKLAPPEN_NACH_KOMFORTSCHLIESSEN
KOMFORTSCHLIESSUNG_FB
KOMFORTSCHLIESSUNG_PA

Change only the Drop-down selection to aktiv, and leave the Werte values alone.

You will need to hold the Fob Button or touch the CA Door Ridges for a couple seconds for it to work.

You da man!

[vkoprivica]

Originally Posted by kon

the dealer generally couldn't change specific settings you asked for - the feature is there in your F30, you need to use esys to manually change the IHKA module.

Please let me know what is the version of esys I should be using?

[kon]

Originally Posted by vkoprivica

Please let me know what is the version of esys I should be using?

refer to this earlier post by our resident expert

http://www.f30post.com/forums/showpo...postcount=3282

[ykau]

Hi Shawn, I think i have asked before, but would like to ask again if the odometer mileage value can be just changed via esys or fsc?
reason our country will consider warranty expired after driving for more than 100K. thanks

[ykau]

Hi Shawn, is both 6NL and 6NK the same.

Originally Posted by shawnsheridan

You have 6NL, so you have BT Streaming without coding.

[kon]

Originally Posted by ykau

Hi Shawn, I think i have asked before, but would like to ask again if the odometer mileage value can be just changed via esys or fsc?
reason our country will consider warranty expired after driving for more than 100K. thanks

*subscribed*

[clarence]

Originally Posted by ykau

Hi Shawn, is both 6NL and 6NK the same.

6NK is combox media. 6NL is combox telematics. Essentiall the same thing except for provision of BMW Assist service for the latter case.

[ykau]

Originally Posted by kon

*subscribed*

??

[ykau]

Originally Posted by clarence

6NK is combox media. 6NL is combox telematics. Essentiall the same thing except for provision of BMW Assist service for the latter case.

Thanks man!

[kon]

Originally Posted by ykau

Thanks man!

a good picture from another thread comparing "feature"

http://www.f30post.com/forums/attach...5&d=1350325458

[vkoprivica]

Originally Posted by kon

refer to this earlier post by our resident expert

http://www.f30post.com/forums/showpo...postcount=3282

Thank you.

[kon]

Need help

File for "cafd_000000f9-007_006_009" not found! [C012]


Car i-level was F020-13-03-503 just one level higher than my 49.1 psdzdata

All ECU ok except HU_CIC

[steve@codemybimmer]

Originally Posted by kon

Need help

File for "cafd_000000f9-007_006_009" not found! [C012]


Car i-level was F020-13-03-503 just one level higher than my 49.1 psdzdata

All ECU ok except HU_CIC

Looks like you need 49.2 where the only difference is that file you mentioned - cafd_000000f9.caf.007_006_009.

I think Shawn should be able to just give you that cafd file and you can just plug it into your existing cafd directory and code HU_CIC. I'm taking my car in for service soon as well so I might need it too if they update the software on my car.

[f302012sold]

hey Shawn et all,

it has been a while I have not been on this thread, apparently it has grown from 79 pages to 151 and so much has changed. I think the biggest one would be all of a sudden I would need the paid token and E-Sys 3.22.5 | 49.1 PSdZData to code.. Can I trouble you to PM me the details how to obtain one as well as the files?

sorry to be a bit of outdated .. life changes too fast //

Thanks a million

[shawnsheridan]

Originally Posted by also1412

hey Shawn et all,

it has been a while I have not been on this thread, apparently it has grown from 79 pages to 151 and so much has changed. I think the biggest one would be all of a sudden I would need the paid token and E-Sys 3.22.5 | 49.1 PSdZData to code.. Can I trouble you to PM me the details how to obtain one as well as the files?

sorry to be a bit of outdated .. life changes too fast //

Thanks a million

PM sent.