08-29-2017, 01:15 AM | #1 |
First Lieutenant
133
Rep 321
Posts |
Need help and advice from everyone here. I'm looking at purchasing this setup of 513ms for my 340i xdrive lowered on H&R sport springs.
The setup as it is right now : Front : 18x9 et 29 255/40 Rear : 18x10 et 40 275/40 Attached are pictures from the test fit. The fronts appear to be fine but the rears appear to poke a lot and may come too close to the suspension. I have no knowledge of tire and wheel sizing that's why I'm coming to the forums for help. I do like this meaty and aggressive look and it will be what I am going for. If this setup works as is I will keep it. Attached are some pictures from the test fit. Thanks in advance for the help.
__________________
2022 G80 M3c xDrive
2018 F80 M3 ZCP 2016 F30 340i xDrive |
08-29-2017, 07:18 AM | #3 |
Private
34
Rep 91
Posts |
Congrats on the wheels! I had the same setup as you until i realized the wheels were messing up my x drive system. You can read my thread for more info on what other members advised me to do.
http://f30.bimmerpost.com/forums/sho....php?t=1396368 |
Appreciate
0
|
08-29-2017, 07:27 AM | #4 |
Major
494
Rep 1,076
Posts |
Yes the 255/40 and the 275/40 were messing the Xdrive up. So the transfer case would get messed up pretty soon if driven with that setup. My car has already been through one transfer case a while ago.
So I used 255/45 in the front and that took care of the issue. But my car is not lowered.not sure how that setup will go with your lowered car. Another option is 235/40/18 and 265/35/18. Below is my thread on this Help with troubleshooting 513m wheel setup http://f30.bimmerpost.com/forums/sho....php?t=1412745 |
Appreciate
0
|
08-16-2018, 04:03 PM | #7 |
First Lieutenant
284
Rep 360
Posts |
your rear camber / toe looks really off have you put the car on the alignment rack ?
__________________
2016 340I build thread : http://f30.bimmerpost.com/forums/sho....php?t=1266037
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|