[jonesdg4]

Has anyone done this mod?

https://www.carqiwireless.com/produc...16977744789593

If so does the sliding cup cover still work fully?

[C320]

Originally Posted by jonesdg4

Has anyone done this mod?

https://www.carqiwireless.com/produc...16977744789593

If so does the sliding cup cover still work fully?

I seem to have an identical charger to the one in your link. The sliding cover works absolutely fine with the charger fitted.

https://f30.bimmerpost.com/forums/sh...7&postcount=15

[charliewaqs]

In the process of doing this mod in the next week or two.

[jonesdg4]

Originally Posted by C320

Yes, I have done and the unit looks identical to the one in your link. The sliding cover works absolutely fine with the charger fitted.

https://f30.bimmerpost.com/forums/sh...8;postcount=15

Thanks. Did you any problem fitting it or getting the console to bits?

[SteveChester]

Any of these that will fit into the armrest ? Or just buy a normal pad and place it in?

[A13x]

what is the charging rate of these pads?

[jonesdg4]

Originally Posted by charliewaqs

In the process of doing this mod in the next week or two.

Now completed this mod....
The wireless positioning of the phone can be tricky to get it charging but other that that it's great

[rlmesq]

Originally Posted by SteveChester

Any of these that will fit into the armrest ? Or just buy a normal pad and place it in?

https://www.aliexpress.com/i/32892531499.html

[xpro]

or even this!

https://www.aliexpress.com/item/OLOP...AbTest=ae803_3

[Pequin]

Here?

https://www.schmiedmann.com/en/produ...4-10-2-449-887