11-13-2022, 05:56 PM | #1 |
New Member
31
Rep 24
Posts |
HammerFab/Mittler Bros sheet metal dimple dies
Have some sheetmetal working tools left over from building a roll cage and dimpled support gussets. Pricing set at about half of what they cost new now. All in excellent condition, well taken care of. SOLD -------------- Mittler Bros 2" punch/flare combo - used for 2 holes. Punch & flare in one operation. Made in the USA from case-hardened tool steel. Material Thickness Range: Aluminum - 18 ga. (.040") to 14 ga. (.062") Mild Steel - 19 ga. (.040") to 16 ga. (.062") Stainless Steel - 19 ga. (.040") SOLD -------------- Set of 3 flaring tools - 1/2", 1", and 1 1/2" holes. Case hardened tool steel, from HammerFab. SOLD -------------- Pair of HammerFab crater-maker tools for stiffening #10 and 1/4" button-head type fastener mounts. CNC-machined and case hardened 4140 steel. SOLD --------------
__________________
'06 3.0Si
Last edited by Dan [Sac]; 11-25-2022 at 09:31 PM.. Reason: Sold |
Post Reply |
Bookmarks |
|
|