BMW F30 3 Series Coding DIY - Code Auto Start Stop, DVD, Folding Mirrors, Etc.

Almaretto · 07-29-2018, 05:57 PM

Quote:

Originally Posted by jkian96

Looks like that's my only option. Thanks for the support.

No, you should not be manipulating date. If upgrading launcher, then try deleting token before launching.

Quote:

Originally Posted by TheBingoBalls

Just rechecked the HU coding tree and nothing listed for what you suggested. What I did find was "Bluetooth_2nd_HFP" and "Two_Phones_Parallel" and both were already set to active.

Perhaps iDrive 6 does something different though I don't seem to have any indication that one phone is "Telephone 1" and the other is "Telephone 2" - and if I connect one, the other disconnects and vice versa.

If you VO coded, then settings should be correct. There are two menus, which can be confusing, for configuring Bluetooth. One need to be set up first so that second displays needed options.

conor7205 · 07-30-2018, 01:35 PM

I am looking specifically for the Enhanced Bluetooth functionality for my 2012 318D M Sport, I can launch E Sys via the launcher and have extracted pszdata into C:\Data.

When I go to click "Connect" there is no F030 connection profile, it goes the F025 profile and then jumps to the F056 profile, I know I must be missing something but I have followed all the steps posted previously?

Thanks,

C

shawnsheridan · 07-30-2018, 01:47 PM

Quote:

Originally Posted by conor7205

I am looking specifically for the Enhanced Bluetooth functionality for my 2012 318D M Sport, I can launch E Sys via the launcher and have extracted pszdata into C:\Data.

When I go to click "Connect" there is no F030 connection profile, it goes the F025 profile and then jumps to the F056 profile, I know I must be missing something but I have followed all the steps posted previously?

Thanks,

C

In E-Sys, you are suppose dot be using F020 Target for F30.

expl0de · 07-30-2018, 02:37 PM

Hi, can I have the new pzsdata? My car was updated and the old version doesn't work any more.

shawnsheridan · 07-30-2018, 02:59 PM

Quote:

Originally Posted by expl0de

Hi, can I have the new pzsdata? My car was updated and the old version doesn't work any more.

PM sent.

sambonator · 07-30-2018, 09:10 PM

Hi I read the first page but didn't see any info on how to obtain the ESys system and related files. May I get information on how to obtain this?
Thank you!
Sam

shawnsheridan · 07-30-2018, 11:06 PM

Quote:

Originally Posted by sambonator

Hi I read the first page but didn't see any info on how to obtain the ESys system and related files. May I get information on how to obtain this?
Thank you!
Sam

PM sent.

GlennG · 08-01-2018, 09:00 AM

Hey Guys!

Tried coding my fathers F30 Today and could get E-sys Launcher to work, it kept asking for me to create a pin. From what I've been able to gather the Token expired 29.06.2018? Currently running Launcher 2.8 with PSdZData_v.4.11.20

Is there any new software available?

shawnsheridan · 08-01-2018, 09:06 AM

Quote:

Originally Posted by GlennG

Hey Guys!

Tried coding my fathers F30 Today and could get E-sys Launcher to work, it kept asking for me to create a pin. From what I've been able to gather the Token expired 29.06.2018? Currently running Launcher 2.8 with PSdZData_v.4.11.20

Is there any new software available?

You need updated Launcher PREMIUM 2.8.2. Same download link as previous versions.

GlennG · 08-01-2018, 09:12 AM

Quote:

Originally Posted by shawnsheridan

You need updated Launcher PREMIUM 2.8.2. Same download link as previous versions.

Found it, great thanks!

waryBMW · 08-03-2018, 10:38 PM

I have a problem with 6wb instrument on my f30 2015.Navigation arrow shows abnormal。

Almaretto · 08-03-2018, 10:46 PM

Quote:

Originally Posted by waryBMW

I have a problem with 6wb instrument on my f30 2015.Navigation arrow shows abnormal。

Elaborate maybe?

waryBMW · 08-03-2018, 10:53 PM

Quote:

Originally Posted by Almaretto

Elaborate maybe?

The navigation arrow is gray. It's dark and unclear.
my 6wb is retrofitted， the HeadUnit（retrofitted） ist a NBT EVO.
how to solve this problem?
3Q!

Almaretto · 08-04-2018, 11:15 PM

Quote:

Originally Posted by waryBMW

The navigation arrow is gray. It's dark and unclear.
my 6wb is retrofitted， the HeadUnit（retrofitted） ist a NBT EVO.
how to solve this problem?
3Q!

Not sure.

deneyer · 08-05-2018, 07:49 AM

Maybe someone here can help me. I have a bmw f34 328i from 2014 with nbt from factory, i did a retrofit of base plate 84109220652 (with option antenna, usb, and video) for snap-in 84212289718(connect version for iphone 5). I connected everything according to bmw wiring diagram, coded 6nh to 6ns to have EBT. Do you need to add other optioncodes then 6ns?

But when i connect phone to the snap-in it only charges and does nothing further, in the i drive it say not connected. Further if i disconnected the usb cable from snap-in and connect just an usb connector the moment its connected my usb1 disconnects to so i have none.

This make me think its just a coding problem but what is it or is it something else?

deneyer · 08-06-2018, 09:54 AM

Quote:

Originally Posted by deneyer

Maybe someone here can help me. I have a bmw f34 328i from 2014 with nbt from factory, i did a retrofit of base plate 84109220652 (with option antenna, usb, and video) for snap-in 84212289718(connect version for iphone 5). I connected everything according to bmw wiring diagram, coded 6nh to 6ns to have EBT. Do you need to add other optioncodes then 6ns?

But when i connect phone to the snap-in it only charges and does nothing further, in the i drive it say not connected. Further if i disconnected the usb cable from snap-in and connect just an usb connector the moment its connected my usb1 disconnects to so i have none.

This make me think its just a coding problem but what is it or is it something else?

You're not gonna tell met that there is no one but me that has this problem and knows how to fix it!!!!!

chris.freeman · 08-06-2018, 10:20 AM

So I just upgraded one of the BMWs to a 2014 F31 and was wondering how I might get my hands on this wonderful software?!?!

Thanks for the help.

shawnsheridan · 08-06-2018, 12:50 PM

Quote:

Originally Posted by chris.freeman

So I just upgraded one of the BMWs to a 2014 F31 and was wondering how I might get my hands on this wonderful software?!?!

Thanks for the help.

PM sent.

shawnsheridan · 08-06-2018, 01:05 PM

Quote:

Originally Posted by deneyer

Maybe someone here can help me. I have a bmw f34 328i from 2014 with nbt from factory, i did a retrofit of base plate 84109220652 (with option antenna, usb, and video) for snap-in 84212289718(connect version for iphone 5). I connected everything according to bmw wiring diagram, coded 6nh to 6ns to have EBT. Do you need to add other optioncodes then 6ns?

But when i connect phone to the snap-in it only charges and does nothing further, in the i drive it say not connected. Further if i disconnected the usb cable from snap-in and connect just an usb connector the moment its connected my usb1 disconnects to so i have none.

This make me think its just a coding problem but what is it or is it something else?

Quote:

Originally Posted by deneyer

You're not gonna tell met that there is no one but me that has this problem and knows how to fix it!!!!!

Asked and answered:

https://www.bimmerfest.com/forums/sh...0&postcount=78

sdk888 · 08-07-2018, 02:04 AM

Hi there,

I picked up a 2015 435i xDrive on the weekend and am looking to get stuck in with some coding. I have E-Sys up and running and am looking for the data.

Shawn - could I ask for your help please? Thnx.

shawnsheridan · 08-07-2018, 06:47 AM

Quote:

Originally Posted by sdk888

Hi there,

I picked up a 2015 435i xDrive on the weekend and am looking to get stuck in with some coding. I have E-Sys up and running and am looking for the data.

Shawn - could I ask for your help please? Thnx.

PM sent.

sdk888 · 08-07-2018, 11:09 AM

Quote:

Originally Posted by shawnsheridan

PM sent.

Thank you Shawn - much appreciated.

07-30-2018, 01:35 PM	#13642
conor7205 Registered 0 Rep 4 Posts Drives: 2012 F30 M Sport Join Date: Jul 2018 Location: England iTrader: (0)	I am looking specifically for the Enhanced Bluetooth functionality for my 2012 318D M Sport, I can launch E Sys via the launcher and have extracted pszdata into C:\Data. When I go to click "Connect" there is no F030 connection profile, it goes the F025 profile and then jumps to the F056 profile, I know I must be missing something but I have followed all the steps posted previously? Thanks, C
	Appreciate 0 Quote

07-30-2018, 02:37 PM	#13644
expl0de Private 20 Rep 65 Posts Drives: BMW f30 320d and e92 320i Join Date: Aug 2014 Location: Bulgaria iTrader: (0)	Hi, can I have the new pzsdata? My car was updated and the old version doesn't work any more.
	Appreciate 0 Quote

07-30-2018, 09:10 PM	#13646
sambonator Samtaro! 124 Rep 2,601 Posts Drives: 2014 F32 N55 Alpinweiß Join Date: May 2007 Location: Newport Beach, CA, USA iTrader: (7)	How to get ESys Hi I read the first page but didn't see any info on how to obtain the ESys system and related files. May I get information on how to obtain this? Thank you! Sam __________________
	Appreciate 0 Quote

08-01-2018, 09:00 AM	#13648
GlennG Registered 0 Rep 4 Posts Drives: F30 Join Date: May 2018 Location: Norway iTrader: (0)	Token? Hey Guys! Tried coding my fathers F30 Today and could get E-sys Launcher to work, it kept asking for me to create a pin. From what I've been able to gather the Token expired 29.06.2018? Currently running Launcher 2.8 with PSdZData_v.4.11.20 Is there any new software available?
	Appreciate 0 Quote

08-03-2018, 10:38 PM	#13651
waryBMW New Member 2 Rep 15 Posts Drives: F30 Join Date: Mar 2017 Location: Lima iTrader: (0)	PLS Help!6WB Navigation display problem I have a problem with 6wb instrument on my f30 2015.Navigation arrow shows abnormal。 Last edited by waryBMW; 08-03-2018 at 10:49 PM..
	Appreciate 0 Quote

08-05-2018, 07:49 AM	#13655
deneyer Second Lieutenant 35 Rep 277 Posts Drives: BMW Join Date: Apr 2017 Location: Belgium iTrader: (0)	Maybe someone here can help me. I have a bmw f34 328i from 2014 with nbt from factory, i did a retrofit of base plate 84109220652 (with option antenna, usb, and video) for snap-in 84212289718(connect version for iphone 5). I connected everything according to bmw wiring diagram, coded 6nh to 6ns to have EBT. Do you need to add other optioncodes then 6ns? But when i connect phone to the snap-in it only charges and does nothing further, in the i drive it say not connected. Further if i disconnected the usb cable from snap-in and connect just an usb connector the moment its connected my usb1 disconnects to so i have none. This make me think its just a coding problem but what is it or is it something else?
	Appreciate 0 Quote

08-06-2018, 10:20 AM	#13657
chris.freeman Registered 0 Rep 1 Posts Drives: 2012 328DXI, 2002 X5, 2002 530 Join Date: Aug 2018 Location: Nashville iTrader: (0)	So I just upgraded one of the BMWs to a 2014 F31 and was wondering how I might get my hands on this wonderful software?!?! Thanks for the help.
	Appreciate 0 Quote

08-07-2018, 02:04 AM	#13660
sdk888 New Member 0 Rep 7 Posts Drives: Alpina B4 BiTurbo Allrad Join Date: Aug 2018 Location: Sweden iTrader: (0)	Hi there, I picked up a 2015 435i xDrive on the weekend and am looking to get stuck in with some coding. I have E-Sys up and running and am looking for the data. Shawn - could I ask for your help please? Thnx. __________________ __________________ 2014 Alpina B4 BiTurbo Allrad 2015 435i xDrive (Sold)
	Appreciate 0 Quote