[kern417]

[d1mitrov]

Originally Posted by Johnny250

there's a lot of factors, what kind of wheel, brand.. i can easily find you a set of wheels in that size for 2k or less.

i dont care so much about the brand so long that it looks good. i like concave wheels(why i want an 11, bigger concave) something that looks like this in 19x9.5 19x11 5x120

[Dubsteporstfu]

Anybody done 19x10 +40 on the front
I’m currently staggered on xdrive and wanna switch to squared with new wheels and wondering how that will fit or if it’ll rub, I’m on airlift

[d1mitrov]

aaand hes gone...

[Spielzeugauto]

Originally Posted by Dubsteporstfu

Anybody done 19x10 +40 on the front
I’m currently staggered on xdrive and wanna switch to squared with new wheels and wondering how that will fit or if it’ll rub, I’m on airlift

Not a chance that'll fit. Way too far inboard.

[crimson_king]

Originally Posted by Spielzeugauto

Not a chance that'll fit. Way too far inboard.

+1, you will need spacers

[crimson_king]

Ok so here's my car. Finally, after so much research and trying to find the right wheels, thank you to everyone on this forum for helping me out with my decisions

19x9.5 +38 squared
15mm spacer in the front, 12mm rear
Lowered on BCs, front cambered with plates, natural camber rear
235 35 19 achilles 2233
Fenders shaved plastics only, not at all rolled or pulled

[JAJJ8485]

Originally Posted by kern417

Got a comparison shot with a coworker's 335i x-drive.

[img]

View post on imgur.com

[/img]

I thought you said your coworker had a 335i as well? The only other vehicle in your picture is that truck parked next to you

[awmenard]

Originally Posted by Dubsteporstfu

Anybody done 19x10 +40 on the front
I’m currently staggered on xdrive and wanna switch to squared with new wheels and wondering how that will fit or if it’ll rub, I’m on airlift

Ive done it... It's a little tricky depending on the rim design.

Rims are for sale if you're interested.

Rotiform SPF 20x10 et 40

[Spanky_F30]

Originally Posted by Johnny250

sideshot and camber specs?

Late reply;

- Camber spec unknown, I haven’t gotten an alignment yet, cause I’ve been fine tuning the whole suspension to functionally drive on the streets being slammed with an aggressive wheel set-up. Currently, rear arches are slightly pulled now to avoid further scraping or bending the outer edge of the wheel or buckling/ crushing the rear panel/ arches when driving in or out of driveways/ dips. And also not having to adjust any more negative camber than it already is ( I have limits)

Overall, I’m very pleased with my current set-up

[stickman1309]

Originally Posted by Spanky_F30

Late reply;

- Camber spec unknown, I haven’t gotten an alignment yet, cause I’ve been fine tuning the whole suspension to functionally drive on the streets being slammed with an aggressive wheel set-up. Currently, rear arches are slightly pulled now to avoid further scraping or bending the outer edge of the wheel or buckling/ crushing the rear panel/ arches when driving in or out of driveways/ dips. And also not having to adjust any more negative camber than it already is ( I have limits)

Overall, I’m very pleased with my current set-up

This thing so awesome in person, super clean and dialed in🤟🏻

[d1mitrov]

what about a set of 19x9.5 et22 and 19x10.5 et 25? 225/35 and 255/35 ?

[F30_SixSpeed]

New setup for the back! Went for the meaty look and fitment... plus I need more traction so I went wide. No rubbing!

Rear Specs: 19x10" et 40 with 285/30/19 tires, -1.6 camber
KW V2 coilovers

[kern417]

Originally Posted by F30_SixSpeed

New setup for the back! Went for the meaty look and fitment... plus I need more traction so I went wide. No rubbing!

Rear Specs: 19x10" et 40 with 285/30/19 tires, -1.6 camber
KW V2 coilovers

Jelly. My 275s are soooo close, even at -2.5 camber. But I really don't want to raise it up

[F30_SixSpeed]

Originally Posted by kern417

Jelly. My 275s are soooo close, even at -2.5 camber. But I really don't want to raise it up

It does look great... I think I can fit 295s in there tbh ha!

I may increase camber a bit... thinking -2.0 or so. I want to get more drive time and go from there.

[chrisstrann]

anyone here running 19x9.5 +22 F & 19x10.5 +22? F30

[Dubsteporstfu]

Originally Posted by Spielzeugauto

Not a chance that'll fit. Way too far inboard.

That’s what I was thinking and spacers will prevent the car from airing out lol

[Dubsteporstfu]

Originally Posted by awmenard

Ive done it... It's a little tricky depending on the rim design.

Rims are for sale if you're interested.

Rotiform SPF 20x10 et 40

Was looking at rotiform las-r but from your pics I’d destroy my fenders as soon as I air out, probably just got 8.5 35 and 10 40 like my last set up

[DThr33]

Originally Posted by F30_SixSpeed

New setup for the back! Went for the meaty look and fitment... plus I need more traction so I went wide. No rubbing!

Rear Specs: 19x10" et 40 with 285/30/19 tires, -1.6 camber
KW V2 coilovers

IDK how you did it haha I had 285/30/20 with Eibach lowering springs and it rubbed so much, especially when I had passengers! How stiff are your dampers set?

[F30_SixSpeed]

Originally Posted by DThr33

IDK how you did it haha I had 285/30/20 with Eibach lowering springs and it rubbed so much, especially when I had passengers! How stiff are your dampers set?

About halfway, a few clicks stiffer.

[Simon89]

@smee looks ace

[Skipdeez]

Not sure if I can play here yet, but I'm pretty happy with Forgestar F14's 19x8.5 front and 19x9.5 rear. Continental DWS 06 225/40 and 255/35 (xdrive so trying to match stock ride height) with KW V1 Coilovers. Still in the settling in period, but may drop it a little lower still. It's a daily driver so trying to be semi-aggressive.