09-06-2015, 12:28 PM | #1 |
Colonel
1098
Rep 2,108
Posts |
19" HRE 840R Wheels - Basically Brand New - 19x9+19 19x10+12
Bought a brand new set of HRE 840R wheels, and decided not to go through with the fender work to get them on my 335xi. Anyway, they were all completely refurbished by HRE themselves. And when I say completely, I mean it. New hardware/lips everything. The wheels look PERFECT, as if they just rolled off the line. 0 miles since the rebuild. If these would fit my car, I would've loved to have used them. Wheel Specs Front: 19x9 +19 (around a 2.5 lip) Rear 19x10 + 12 (around a 3.5-4" lip) Don't be deceived by the angle of the pic I couldn't get a better one. New these were $6,580 and these are in the same condition as new. My price is $3,500 + shipping. They will come packaged extremely well in the original HRE boxes. Last edited by Mar48; 11-19-2015 at 07:21 PM.. |
09-13-2015, 07:27 PM | #3 |
Captain
169
Rep 821
Posts
Drives: 2017 C43 AMG
Join Date: Apr 2011
Location: NOVA
|
Do these even fit f30 with that offset?
__________________
2014 X5 xDrive50i Mineral White | DinanTronics Stage 1 | Vossen HC3
|
Appreciate
0
|
09-13-2015, 08:34 PM | #4 |
Colonel
1098
Rep 2,108
Posts |
Only posted on here for those guys looking to "Stance" their car. These are for higher series BMWs and can work on M models.
On an f30 it would most likely need fenders rolled, camber, and maybe conservative tire sizes |
Appreciate
0
|
11-02-2015, 12:03 AM | #10 |
Colonel
1098
Rep 2,108
Posts |
^ Not accurate.
http://www.e90post.com/forums/showth...=985324&page=4 These are aggressive for an F32... Will they fit without camber - not without rubbing, but they can work just fine if you use some camber and stick to 'relatively' conservative tires. The car in the link I posted has more aggressive wheels than mine (9.5" front/11" rear with similar offsets) and used 235/275 tires with 2-2.5 degrees of camber. |
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|